Cart 2 india

Specification
Brand : Aexit
BulletPoint1 : Product Name : Tap;Thread Size : Z 1/2-14 (21mm Dia.);Thread Type : NPT (60 Degree)
BulletPoint2 : Thread Length : 30mm / 1.2";Number of Flutes : 4;Square Head Size : 14.5 x 14.5mm/ 0.57" x 0.57" (L*W)
BulletPoint3 : Shank Diameter : 18mm/ 0.7";Total Length : 75mm/ 3"
BulletPoint4 : Color : Silver Tone;Material : HSS
BulletPoint5 : Net Weight : 123g;Package Content : 1x Tap
FinishType : Uncoated
ItemName : Aexit Z 1/2-14 Taps & Dies NPT 60 Degree Pipe Thread HSS Tap 4 Flutes Tap Extractors 75mm Length
ItemPackageDimensions_Height : 0.47 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : pipe-taps
Manufacturer : Aexit
Material : hss
ModelName : M16 x 1.5
ModelNumber : modle
PartNumber : B01025374
ProductDescription :
Thread Size: M16 x 1.5 (Right Hand)
Outside Diameter: 38mm / 1.5"
Thickness: 10mm / 0.39"
Accuracy Class: 6g
Material: M2 (6542) High Speed Steel
Package Content: 1pcs x Round Die


Descriptions:The metric threading die is made of M2 (6542) high-speed steel, which has high hardness, good toughness, wear resistance, and excellent cutting performance.
Round dies can process, correct or clean the external threads, and is used for ordinary thread processing of stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic. Great for maintenance and repair work on pipes, boards and machinery.
Conical locking hole, strong locking force, no loosening. Suitable for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair.
The round threading die is used with die stock (also called die handle or die wrench). The positioning groove of the die should be aligned with the fastening screw in the middle of the wrench, and the screw should be inserted into the groove of the die and tightened. It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole.
Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The end of the bar stock should be chamfered 1*45 degree, and the chamfer is too large to cut in. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and cause damage to the die teeth.

ProductSiteLaunchDate : 2018-09-19T09:32:02.865Z
Size : M16 x 1.5
SpecificUsesForProduct : Thread Repair
Style : Round Die
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1