Cart 2 india

Specification
Brand : SharkBite
BulletPoint1 : SHARKBITE BRASS PUSH REDUCING ELBOW: This push-to-connect fitting allows you to make a connection between two different-sized pipes quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
BulletPoint2 : VERSATILE: Pushfit 90-degree reducing elbows work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes
BulletPoint3 : EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push 90-degree reducing elbow allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines
BulletPoint4 : PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels
BulletPoint5 : SPECS: Made with DZR forged brass, this 90-degree reducing elbow can withstand 200 degrees F and 200 PSI
BulletPoint6 : Please ensure correct installation before use to prevent air leakage. If the connector fitting is missing, please contact us for a free replacement. Thanks for your support.
Color : Brass
Color1 : Black
Color2 : Yellow
ConnectorType : Elbow
CustomerPackageType : Standard Packaging
Department : Unisex-Adult
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 697285465862
ExternallyAssignedProductIdentifier2 : 0697285465862
ExternallyAssignedProductIdentifier3 : 00697285465862
IncludedComponents : Brass PEX Reducing Elbow
ItemDisplayDimensions_Length : 2.32 inches
ItemDisplayWeight : 2.59 ounces
ItemLength : 33 feet
ItemName : SharkBite 3/4 Inch x 1/2 Inch 90 Degree Reducing Elbow, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U274LFA
ItemPackageDimensions_Height : 10.795 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 8.2042 centimeters
ItemPackageQuantity : 1
ItemShape : 90 degree elbow
ItemTypeKeyword : pipe-fittings
Manufacturer : Cash Acme
Material : Brass
MaximumOperatingPressure : 125 pounds_per_square_inch
ModelName : Brass Push Reducing Elbow
ModelNumber : U274LFA
NumberOfItems : 1
NumberOfPieces : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : U274LFA
ProductDescription : The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079in UV-resistant yellow polyethylene jacket.
Connected with solid brass connector, It hasdv very good weather resistance, anti-cracking, anti-rust and very durable.
Comes with a 1/2" male brass fittings on both end, standard male pipe threads for easy connections.
Used for connecting high BTU output outdoor cooking appliances, construction heaters, with no need to cut or thread. Pipe is 80% lighter than steel pipe. Over 65% faster to install than black pipe.
The flexible nature CSST is much safer than black pipe in an earthquake.
4 sizes to choose from, there is always a length that suits you, the grill can be used at a safe distance. Give you a free, flexible and safe experience.

Installation tips:
Outside Installation: When you installed the pipe outside where it can be exposed to direct sunlight, it shall be covered with conduit to prevent continuous exposure.
Inside Installation: When the pipe is installed inside the building , you can install it exposed to indoor light, embedded in concrete, or behind the wall in dry wall systems as needed.
Underground Installation: The outer PE layer create a shield that makes it resistant against acid, alkaline or salty soil and alloys the system to be buried underground.

Specification:
Material: Premium rubber, brass connector
Length: 33 feet
Inner diameter of the pipe: 0.48in/ 12mm
Outer diameter: 0.63in/ 16mm
Flow rate: 100000 BTU/hr
Quick Connector: 1/2" male quick connect

Note:
△ leak detection must be done before use to prevent the leakage.
△ Please check your devices size before your purchase.
△ For your safety, please keep the hose away from high temperature.
△ It is Not recommended for cutting to use if you are not professional gas installers.

ProductDescription1 : Leak-B-Gone Rings are intended to permanently repair leaks at PVC pipe joints where the glue has not adhered properly during install, or where the joint has come loose.
ProductDescription2 : When installed properly under the appropriate conditions, the Leak-B-Gone ring could save you hundreds of dollars and hours of time cutting out and replacing leaking PVC pipe!
ProductDescription3 : Leak-B-Gone, however, does not work for all applications. Before you buy, we wanted to make you aware of some instances where Leak-B-Gone might not work for you.
ProductSiteLaunchDate : 2009-10-28T11:19:51.000-00:00
Size : 3/4 in. x 1/2 in.
SpecificationMet : NSF/ANSI 61,IAPMO/ANSI Z1157-2014e1 ,CUPC, NSF372
Style : SharkBite
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700
ValveType : Ball Valve