Cart 2 india

Specification
Brand : Aquor
BulletPoint1 : Compatibility: Use with our Aquor V1/V1+/V2+ House Hydrants, RV City Water Inlet for RVs/campers, Universal Hydrant for decks/fences/unique applications, and Marine Deckwash for boats/yachts. Not compatible with Ground Hydrants or Hot+Cold Hydrants.
BulletPoint2 : Inlet Threading: The 1/2" NPT (f) inlet makes your Aquor installation even easier, ensuring smooth transitions and easy pipe navigation, while the unique O-ring seal allows elbow inlet positioning in any direction.
BulletPoint3 : Replacement: This installation fitting replaces standard straight 1/2” NPT inlets and is used on the back end of your Aquor hydrant. The outlet threading is unique to our brand of hydrants and outlets. It shortens the overall hydrant length by 1/2".
BulletPoint4 : Stainless Steel Material: Our NPT inlets are made of precision-cast 316L stainless steel, a material known for high durability, lifespan, freeze protection, and corrosion resistance. Includes a stainless steel valve reset spring.
BulletPoint5 : Limited 5-Year Warranty: All Aquor's installation parts and accessories, including the stainless steel inlets, are backed by a 5-year limited lifetime warranty.
Color : Stainless Steel
ConnectorType : Cap
CustomerPackageType : Standard Packaging
ExteriorFinish : Sandblast
ExternallyAssignedProductIdentifier1 : 850007299194
ExternallyAssignedProductIdentifier2 : 0850007299194
ExternallyAssignedProductIdentifier3 : 00018578001664
IncludedComponents : Actual Item
ItemDisplayDimensions_Length : 6 inches
ItemDisplayWeight : 0.1 pounds
ItemLength : 4.5 inches
ItemName : Aquor 1/2 Inch NPT 90 Degree Elbow Stainless Steel Inlet, Pipe Fitting Accessory, Installation Part for Aquor House, RV, and Boat Hydrants
ItemPackageDimensions_Height : 11.684 centimeters
ItemPackageDimensions_Length : 2.794 centimeters
ItemPackageDimensions_Width : 9.144 centimeters
ItemPackageQuantity : 1
ItemShape : flange
ItemTypeKeyword : pipe-fittings
Manufacturer : Aquor
Material : Stainless Steel
MaximumOperatingPressure : 200 pounds_per_square_inch
MaximumPressure : 250 pounds_per_square_inch
ModelName : Supply Giant VQDUG34
ModelNumber : INL-EL-12-NPT
NumberOfItems : 1
NumberOfPieces : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : INL-EL-12-NPT
ProductDescription : The Aquor 1/2” 90° Elbow NPT Stainless Steel Inlet replaces the default hydrant inlet on the back of your Aquor House Hydrant. Quickly and reliably connect your Aquor hydrant to any plumbing while shortening the overall length of your hydrant by 1/2”. Compatible with any plumbing - NPT is the most common thread type. To install, simply remove the existing hydrant inlet and thread on the new one clockwise. The O-ring will keep a watertight seal up to 360° from full lock, up to 250 PSI, and allow the elbow inlet to be positioned in any direction. You may rotate counterclockwise until it is positioned in the correct direction for installation. Precision-cast 316L stainless steel is used in our 1/2" and 3/4" NPT, PEX Crimp, and PEX Expansion inlets. Includes a stainless steel valve reset spring. We use stainless steel for its durability, corrosion resistance, freeze protection, and lifespan. All Aquor's installation parts and accessories, including the stainless steel inlets, are backed by a 5-year limited lifetime warranty.
ProductSiteLaunchDate : 2022-05-20T12:21:09.457Z
Size : 1/2 in NPT 90 Degree Elbow
SpecificationMet : NSF
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700
ValveType : check valve