Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint1 : Shaft fitting accessories to connect two different shafts and make them rotate together to transmit torque. Applied for RC model car, RC model boat, 3D printers, snow blowers, grinders and other DIY projects
BulletPoint2 : Color: Silver Tone; Outer Dia.: 16mm/0.63inch; Inner Dia: 10mm x 10mm/0.39inch x0.39inch; Length: 35mm/ 1.38/ 1.38inch; Fastening Screws: M4*0.7
BulletPoint3 : The universal joint is made of 45# steel and with electroplated finish, sturdy and durable. Features with large transmission torque, high efficiency, stable transmission, small gap impact
BulletPoint4 : When you installing it, firstly install the two halves of the coupling on the two connected shafts respectively, then align, move and adjust the shaft to the correct place
BulletPoint5 : In order to give full play to its function, please start the installation within the maximum allowable eccentricity range
BulletPoint6 : This joint or coupling connects rods whose axes are inclined to each other.
ConnectivityProtocol : X-10
ExternallyAssignedProductIdentifier : 9497383856880
ItemName : MECCANIXITY 10mm to 10mm Inner Dia Rotatable Universal Joint Shaft Coupling Motor Shaft Coupler L35 x D16 with Screws and Wrench for RC Model
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : pin-and-block-universal-joints
Manufacturer : MECCANIXITY
Material : Steel
MountingType : Surface Mount
NumberOfItems : 1
PartNumber : mea210520ee0218
ProductDescription : What is this?
Shaft fitting accessories to connect two different shafts and make them rotate together to transmit torque. Applied for RC model car, RC model boat, 3D printers, snow blowers, grinders and other DIY projects.

What will I get?
Color: Silver Tone
Material: 45# Steel
Surface Finish: Electroplated
Section: One
Size: 35mm x 16mm/1.38inch x 0.63inch (L*D)
10mm to 10mm(0.39inch to 0.39inch)
Package Contents: 1 x Universal Joints, 1 x Wrench, M4*0.7 Fastening Screws

Is there any advantages of the product?
Made of 45# steel and with electroplated finish, the universal joint is sturdy and durable.
Features with large transmission torque, high efficiency, stable transmission, small gap impact. Especially under the correct technical control conditions, it can access long lasting use.

How to use it ?
When you installing it, firstly install the two halves of the coupling on the two connected shafts respectively, then align, move and adjust the shaft to the correct place.

What should I notice?
In order to give full play to its function, please start the installation within the maximum allowable eccentricity range.
ProductSiteLaunchDate : 2021-10-29T04:23:53.811Z
Size : 10mm to 10mm
SpecificationMet : Surplus Item - Package Condition/Type May Vary
Style : UNMP
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27110000