Cart 2 india

Specification
Brand : uxcell
BulletPoint : Bore Size (ID) 1-1/8"" (28.58mm) Outer Diameter (OD) 65mm Total Length 155mm Base to Center Height 60mm Bolt Hole Distance 92mm Bolt Hole Diameter 10mm
BulletPoint1 : Model: UCFL207 Bearings are designed to accommodate a shaft diameter of 35mm. Come with 4pcs screws and 2pcs key wrench.
BulletPoint2 : Material: Chrome steel sealed bearing and solid cast iron housing, providing durability and resistance to corrosion.
BulletPoint3 : Bearing Type: The pillow block bearing uses a standard ball bearing insert, which allows for high radial loads and moderate axial loads. Self-aligning, capable of compensating for misalignment between the shaft and the housing.
BulletPoint4 : Usage: Commonly used in machinery and equipment, particularly in the agricultural and industrial sectors. It is designed to support rotating shafts and provide stability and smooth operation
BulletPoint5 : Lubrication: The bearing is pre-lubricated with grease and ready for immediate installation. The appropriate lubricating oil can be added through a grease nipple after using for some time.
Color : Dark Green
ExternallyAssignedProductIdentifier : 7448314669293
ExternallyAssignedProductIdentifier1 : 0639072142624
ExternallyAssignedProductIdentifier2 : 639072142624
ExternallyAssignedProductIdentifier3 : 00087796059559
GpsrSafetyAttestation : 1
IncludedComponents : Pillow Block Bearing
ItemName : uxcell 2pcs UCFL207 Pillow Block Bearings 35mm Bore Self Alignment, Solid Cast Iron Base Mounted Chrome Steel Bearings
ItemPackageDimensions_Height : 5.08 inches
ItemPackageDimensions_Length : 9.09 inches
ItemPackageDimensions_Width : 5.67 inches
ItemPackageQuantity : 2
ItemTypeKeyword : pillow-block-bearings
Manufacturer : uxcell
Material : Alloy Steel
Material1 : Bearing Material: Chromium Steel ( Gcr15 )
Material2 : Housing Material: Cast Iron
ModelNumber : UCP206-18 P_Solid
NumberOfItems : 2
PackageLevel : unit
PartNumber : f23120500ux0052
ProductDescription : Material: Chrome steel sealed bearing and cast iron housing, providing durability and resistance to corrosion.
Bearing Type: Self-aligning pillow block bearing, capable of compensating for misalignment between the shaft and the housing.
Bearing Insert: The pillow block bearing uses a standard ball bearing insert, which allows for high radial loads and moderate axial loads.
Lubrication: The bearing is pre-lubricated with grease and ready for immediate installation. The appropriate lubricating oil can be added through a grease nipple after using for some time.
Usage: Commonly used in machinery and equipment, particularly in the agricultural and industrial sectors. It is designed to support rotating shafts and provide stability and smooth operation.
Tips: Tighten the set screw with a wrench before installation, and perform a second tightening after a period of operation. Normally, this type of product requires 2-3 times of screw tightening.

ProductSiteLaunchDate : 2024-01-06T08:10:40.407Z
Size : UCFL207
SpecificationMet : ABEC 7
SpecificationMet1 : ISO 9001
SpecificationMet2 : ISO 16949
StreetDate : 2017-05-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2
UnspscCode : 31171500