Cart 2 india

Specification
Brand : Jeremywell
BulletPoint1 : Design: UCF flanged series has four-bolt mounting with set screw locking.
BulletPoint2 : Self-Aligning Feature: These bearings use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
BulletPoint3 : Pre-lubricated: Bearings come pre-lubricated and ready for immediate installation. A grease fitting is supplied for re-lubrication.
BulletPoint4 : Applications: UCF pillow blocks are suitable for a variety of applications such as agricultural equipment, conveyor systems, industrial machinery, food processing and much more.
BulletPoint5 : Material: Made to last, our mounted bearings consist of chrome steel (AISI 52100) ball bearings for higher resistance and durability.
Color : Multi
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 023899129478
ExternallyAssignedProductIdentifier2 : 0023899129478
ExternallyAssignedProductIdentifier3 : 00023899129478
IncludedComponents : Pillow Block Bearing
ItemDisplayDimensions_Length : 5 inches
ItemDisplayWeight : 2.53 pounds
ItemName : Jeremywell UCF207-20 Pillow Block Bearing (2 Pack), 1-1/4 inch Bore, 4-Bolt Flange Mounted, Solid Base, Self-Alignment,Square
ItemPackageDimensions_Height : 27.7114 centimeters
ItemPackageDimensions_Length : 5.6896 centimeters
ItemPackageDimensions_Width : 18.4912 centimeters
ItemPackageQuantity : 2
ItemTypeKeyword : pillow-block-bearings
Manufacturer : Jeremywell
Material : Steel
ModelNumber : PB-UCF207-20-2PCS
NumberOfItems : 1
PackageLevel : unit
PartNumber : PB-UCF207-20-2PCS
ProductDescription : This series ball bearing unit is a double sealed bearing with a steel cage, set screws and is pre-housed. The double sealed bearing keeps the lubricant in and contaminants out. The steel cage that evenly spaces the balls for reduced friction, vibration and noise. The set screws enable the inner ring of the bearing to be fixed to the shaft, preventing slippage. This bearing has a solid base with two bolt holes which is easy to install and safe to replace. A mounted unit is essentially a ball bearing with a spherical outer ring (self-alignment to avoid any misalignment), the ability to lock on to the shaft, and is pre-housed. Example of possible applications include: mining, metallurgy, agriculture, chemical engineering and conveying machinery, etc. The bearing is sealed on both sides to keep the lubricant in and contaminants out. It has a solid base with 4 bolt holes for easy mounting, installation and safe replacement. Steel cage evenly spaces balls for reduced friction, vibration and noise. Deep groove geometry for high speeds and supporting both radial and axial loads.
ProductSiteLaunchDate : 2017-03-17T23:51:30.016Z
Size : 2pcs KFL002
Style : 2 Bolts
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 2