Cart 2 india

Specification
Brand : SUN-BEARINGS
BulletPoint : FAG UCP214-43 J7 Housing and Bearing SYJ2.11/16 YAR213-211-2F + SYJ513 2 11/16"
BulletPoint1 : Model: UCP202 Bearings are designed to accommodate a shaft diameter of 15mm. Come with 4pcs screws and a key wrench.
BulletPoint2 : Material: Chrome steel sealed bearing and solid cast iron housing, providing durability and resistance to corrosion.
BulletPoint3 : Bearing Type: The pillow block bearing uses a standard ball bearing insert, which allows for high radial loads and moderate axial loads. Self-aligning, capable of compensating for misalignment between the shaft and the housing.
BulletPoint4 : Usage: Commonly used in machinery and equipment, particularly in the agricultural and industrial sectors. It is designed to support rotating shafts and provide stability and smooth operation
BulletPoint5 : Lubrication: The bearing is pre-lubricated with grease and ready for immediate installation. The appropriate lubricating oil can be added through a grease nipple after using for some time.
Color : Deep Green
IncludedComponents : FAG UCP214-43 J7 Housing and Bearing SYJ2.11/16 YAR213-211-2F + SYJ513 2 11/16"
ItemName : FAG UCP214-43 J7 Housing and Bearing SYJ2.11/16 YAR213-211-2F + SYJ513 2 11/16"
ItemPackageDimensions_Height : 2.76 inches
ItemPackageDimensions_Length : 7.68 inches
ItemPackageDimensions_Width : 6.65 inches
ItemTypeKeyword : pillow-block-bearings
Manufacturer : SUN-BEARINGS
Material : Alloy Steel
NumberOfItems : 1
PartNumber : UCP214-43 J7
ProductDescription : BRAND: FAG ID: UCP214-43 J7 DESCRIPTION: Item NumberUCP214-43-J7 FAG Manufacturer Part Number0812174040000 Also known asSYJ2.11/16TF UC214-43 + P214-J7 YAR213-211-2F + SYJ513 EAN4047643261166 CategoryHousing and Bearing (assembly) Weight and Dimensions Inner (d) MM68,26 Outer (D) MM265,91 Width (B) MM72,23 Inner (d) Inch2.6875 Outer (D) Inch10.4688 Width (B) Inch2.8438 Weight (kg)6.31 Product Properties Seal2F - Standard Seal for Y-bearings Lubrication Standard Lubrication Special Treatment No Special Treatment Data from Schaeffler (medias)Length total (L) mm266 Height (H 2) mm157 ECLASS number23-05-16-01 ECLASS2 number23-05-16-01 Medias description Plummer block housing units UCP, cast iron housing, with long base, radial insert ball bearing with grub screws in inner ring, RSR seals Suffix description 432.11/16" Bore J7This Suffix Is The Standard With A Better Fitting In The Housing Product description The UCP214-43-J7 FAG is a housing unit. The components of this bearing and housing assembly are matched to each other for reliable operation. This complete set is ready for use and easy to install. Housings simplify the installation of the bearing and shaft. Additionally, the bearing is supported and protected by the housing. Product characteristics Category:Plummer block housing u. Weight:6,200 kg ProductID:10264786 Customs tariff number:8483 2000 EAN:4047643261166 Manufacturer part number:081217404-0000 Dimensions Inner dimension: 68,263 mm PACKAGE INCLUDES: ONE (1) FAG UCP214-43 J7
ProductSiteLaunchDate : 2024-09-27T19:12:21.353Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2
UnspscCode : 31171500