Editorial Review Guitar players want it all and they want it now. Fat humbucker tones. Beefy P-90 tones. Traditional single coil tones. With P-Rails they can have it all. And now, with the new P-Rails Hot, they can get a punchier, more aggressive tone for the bridge position. This Seymour Duncan-exclusive design is a direct humbucker retrofit that allows up to three distinct voices: full-size humbucker, P-90, and Rails. Recommended for all styles of music. Compared to Original P-Rails, the Hot bridge features a beefed up coil and a more powerful Alnico 8 magnet to deliver the same tonal flexibility as its predecessor, but specifically designed to provide a punchier, more aggressive tone in the bridge position. The P-90 coil in the P-Rails Hot is wound with a special wire type, selected for output and clarity. This P-90 is loud! The Rail mode is hotter thanks to the power of the Alnico 8, and the series Humbucker mode is huge! A complete setup would include a P-Rails Hot in the bridge and a P-Rails Original in the neck. To get both humbucker and P-90 tones, use a two-way switch (push-pull or mini-toggle, not included). Use a three way switch (DPDT on-off-on, not included) to bring in the single coil Rail tones. The P-Rails Hot can be used in any guitar set up for a traditional humbucker or Trembucker. It can be used singly, however to maximize the P-Rails unique splitting capabilities and get the most tonal versatility, use a neck and bridge set. The R-Rails Hot is recommended for bridge position.
Features 1) P-Rails SHPR-2b HOT P-90 Bridge Pickup 2) Switchable P-90 and Single Coil Pickups 3) Standard Humbucker Size 4) Cream Cover 5) 21 Day Real World Exchange