Cart 2 india

Specification
Brand : TEAMWILL
BulletPoint : Single-coil Electric Bass Pickup with Ceramic Magnets - Gloss Black Cover
BulletPoint1 : The sound pickup is high-quality 50mm Piezoelectric ceramic disc transducer,It is very large and can collect a wider range of sound in case you are sure where are the best parts of the sounds.
BulletPoint2 : This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!Fit for most st music instruments such as Guitar Mandolin Cigar box Guitar Violin Ukulele Banjo, etc.
BulletPoint3 : Installation instruction:1 Take the plastic film down from the back of transducer to expose the adhesive, 2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response,3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut The above procedures depend on different instruments.
BulletPoint4 : Package included:8 x Disc piezo pickup
BulletPoint5 : HassleFree Installation: Our pickup bridge protective cover set comes complete with 4 mounting screws, making installation a breeze without requiring any special tools or technical skills. Whether you're a seasoned musician or a beginner, you'll appreciate the user-friendly design that allows you to easily enhance your instrument's protection. Spend less time on setup and more time enjoying your music!
BulletPoint6 : Note: There is a slight difference in the hole spacing between the bridge pickup cover and the neck pickup cover. Please measure the pole piece spacing of your pickup before placing an order to ensure a perfect fit
Color : Schwarz
ExternallyAssignedProductIdentifier : 8021950525872
ExternallyAssignedProductIdentifier1 : 0720118875597
ExternallyAssignedProductIdentifier2 : 720118875597
FinishType : spray paint
GpsrSafetyAttestation : 1
ItemName : 8 Sets 50MM Guitar Pickup Piezo Transducer Prewired Amplifier With 6.35MM Output
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : bass-guitar-pickups-and-pickup-covers
Manufacturer : TEAMWILL
ModelName : DP296G
ModelNumber : DP296G
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : AMP4PCS*2
ProductDescription : The sound pickup is high-quality 50mm Piezoelectric ceramic disc transducer
It is very large and can collect a wider range of sound in case you are sure where are the best parts of the sounds.
This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!
Fit for most st music instruments such as Guitar Mandolin Cigar box Guitar Violin Ukulele Banjo, etc.
Installation instruction:
1 Take the plastic film down from the back of transducer to expose the adhesive
2 Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response
3 Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut
The above procedures depend on different instruments.
Specification:
color:black
Material: metal + plastic
Cable long : approx 42cm/16.5 inch
Plug Dia: approx 6.35mm/0.25 inch
Package included:
8 x Disc piezo pickup
ProductSiteLaunchDate : 2023-11-30T11:55:21.916Z
Size : Pタイプ
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 60131500
WarrantyDescription : Please contact the seller directly for warranty information for this product. You may also be able to find warranty information on the manufacturer’s website.