Cart 2 india

Specification
Alarm : Visual
Brand : Seco-Larm
BulletPoint1 : Twin beams minimize false alarms from falling leaves, birds, etc.
BulletPoint2 : Automatic input power filtering with special noise rejection circuitry
BulletPoint3 : Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc.
BulletPoint4 : Quick, easy installation with built-in laser beam alignment system
BulletPoint5 : Monitored output: N.C. or 10kΩ resistor on N.O. output
BulletPoint6 : PIN DEFINITION: VCC is connected to the positive pole of the power supply, GND is connected to the negative pole of the power supply, OUT switch signal output.
BulletPoint7 : PRODUCTS INCLUDE: 5 x Correlation Photoelectric Sensor;5 x Encoders;15 x Male and female cable.
CenterlineLength : 7 centimeters
CircuitBreakerType : Standard
Color : Yellow
ConnectorType : Screw
CurrentRating : 300 milliamps
ExternallyAssignedProductIdentifier : 7352918842252
ExternallyAssignedProductIdentifier1 : 676544017325
ExternallyAssignedProductIdentifier2 : 0676544017325
GpsrSafetyAttestation : 1
IncludedComponents : Detector and Brackets
ItemName : Seco-Larm E-960-D90GQ Twin Photobeam Detector with Laser Beam Alignment, 10ms Interupt Speed, Non-polarized Power Inputs, Anti-frost System, NO/NC Trigger Output, Weatherproof, 650nm Laser Wavelength
ItemPackageDimensions_Height : 21.1074 centimeters
ItemPackageDimensions_Length : 8.89 centimeters
ItemPackageDimensions_Width : 16.7894 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-photoelectric-sensors
Manufacturer : Seco-Larm
Material : Plastic
Material1 : epoxy
Material2 : resin
ModelNumber : E-960-D90GQ
MountingType : Panel Mount
NumberOfContacts : 3
NumberOfItems : 1
NumberOfPoles : 2
NumberOfPositions : 2
PartNumber : E-960-D90GQ
PowerSourceType : Corded Electric
ProductDescription :

Seco-Larm E-960-D90GQ Twin Photobeam Detector with Laser Beam Alignment, 10ms Interupt Speed, Non-polarized Power Inputs, Anti-frost System, NO/NC Trigger Output, Weatherproof, 650nm Laser Wavelength

ENFORCER Long Range Photobeam Detectors are easy-to-install with laser beam alignment and provide extended range. Designed to provide reliable perimeter security, both indoors and outdoors.

Key Features

• Twin beams minimize false alarms from falling leaves, birds, etc.
• Lensed optics reinforces beam strength and provides excellent immunity to false alarms due to rain, snow, mist, etc.
• Weatherproof, sunlight-filtering case
• Non-polarized power inputs
• Anti-frost system
• Automatic input power filtering with special noise rejection circuitry
• NO/NC trigger output
• N.C. tamper circuit included
• U brackets included for pole mounting
• Quick, easy installation with built-in laser beam alignment system
• Monitored output: N.C. or 10kΩ resistor on N.O. output

Specifications

• Current Draw: 50mA max (laser align only). 150mA max. (active operation excluding laser alignment)
• Sensing Range: Outdoor - 90' (30m), Indoor- 190' (60m)
• Operating Voltage: 12~30 VDC/VAC 60Hz, 200mA
• Interupt Speed: 10ms
• LEDs - Red: "ON" indicates transmitter and receiver not aligned or beam is broken
• LEDs - Yellow: ON indicates weak receiver signal or beam is broken
• LEDs - Green: ON indicates unit connected to power
• Alarm Output: SPDT NO/NC/COM relay, 1A@30VDC/VAC
• Tamper Output: N.C. switch, 1A@30VDC/VAC
• Case material: PC Resin
• Laser Wavelength: 650nm
• Operating Temperature: -13º~+131ºF (-25º~+55ºC)
• Laser Output Power: <5mW
• Alignment Angle: Horizontal (+/-)90º, Vertical: (+/-)5º
• Weight: 2.5-lb (1.1kg)

ProductSiteLaunchDate : 2019-09-04T08:45:06.698Z
RecommendedUsesForProduct : Indoor, Outdoor
SensingMethod : Diffuse
SpecificationMet : Ma
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 46171600
Voltage : 24 volts