Cart 2 india

Specification
Brand : Greensen
BulletPoint : DC5-36V NO/NC M18 Diffuse reflection Infrared induction photoelectric switch
BulletPoint1 : [High measurement accuracy] The sensor is characterized by precise measurement, high stability, long transmission distance and strong interference . the optimal solution for precise and measurements.
BulletPoint2 : [Wide Application] In addition to agricultural use, the sensor can be used in environments such as aquaculture, greenhouses, laboratories and other situations that require photosynthetically effective amplitude measurement.
BulletPoint3 : [High ] The sensor measures the radiant energy in the spectrum of solar radiation, which is absorbed by the plastid pigments of plants, converted and used for the synthesis of organic substances.
BulletPoint4 : [Waterproof] for use outdoors in extreme weather conditions such as rain and snow. , stable and resistant.
BulletPoint5 : [ and Stable] With a robust aluminum housing and heat and aging resistant properties, the sensor offers a long service life and good working conditions under extreme environmental conditions.
Color : Bfx-d1-n
IncludedComponents : NO
ItemName : DC 9-30V Photosynthetic Sensor, Light Barrier, High Accuracy Diffuse Reflection Light Barrier Sensor for Measuring 400-700nm Spectrum (YGC-GHFS-KV-V1)
ItemPackageDimensions_Height : 6 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-photoelectric-sensors
Manufacturer : Greensen
ModelName : Greensen6c8ah9p5g4-12
ModelNumber : Greensen6c8ah9p5g4-12
NumberOfItems : 100
PartNumber : Greensen6c8ah9p5g4-12
ProductDescription : Specification:

Item Type: Photosynthetic Sensor
Material: Aluminum Alloy
Product Size: approx. 65 x 31 mm / 2.6 x 1.2 inches, spacing of mounting holes: 57 mm / 2.2 inches m-2*s-1)
Resolution: 1 W/m2 (or umol*m-2*s-1)
Response time: ≤5 ms (95%)
Nonlinearity: ± 4%
Directional response (corrected to within 80° of angle): ±10%
Temperature response (-20°C to 60°C): ±5%
Annual stability: ±3%
Spectrum response bandwidth: (400 ± 10) nm – (700 ± 10) nm
Spectrum selectivity error: ±5
Response outside the specified bandwidth: ≤ 10%
Protection rating: IP67
Operating temperature: -40-80°C
Relative humidity: 0- relative humidity
Power consumption: ≤100mW 5V
Troubleshooting: The counter display value is incorrect when outputting. This may be due to cabling problems or a serial port communication error, resulting in the inability to retrieve the correct data. Please check whether the wiring is correct and tight, whether the serial port is occupied and whether the serial port setting is correct;
Wiring:
Red wire: Power positive
Green wire: Current negative
White wire: signal

Package list:
1 x photosynthetic sensor with cable
1 x user manual


Application :
1. Use screws to attach the sensor to the mounting bracket through the mounting holes on the sensor.
2. Make sure the device is parallel to the ground (you can adjust the hand screw and check the status of the leveling bubble to see whether it is parallel or not).
ProductSiteLaunchDate : 2024-10-14T03:22:14.894Z
Size : YGC-GHFS-KV-V1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
WarrantyDescription : 1 year