Cart 2 india

Specification
Brand : DAOKAI
BulletPoint1 : WHAT IT DOES: This module can be used for workpiece counting, motor speed measurement.
BulletPoint2 : FEATURES: Output high level (LED light off) when there is an obstruction, output low level (LED light on) when there is no obstruction.
BulletPoint3 : THE OUTPUT FORM: Single-channel signal output;Width of optical coupling slot: 10mm.
BulletPoint4 : SIZE: 2.3 x 2 x 1.8cm / 0.91 x 0.79 x 0.71inch;The two circular holes of the PCB (the distance from the point to the center of the point) are 15mm, and the aperture is 3mm.
BulletPoint5 : CHIP: LM393;Groove type optocoupler: H2010;Working Voltage: DC 5V.
BulletPoint6 : PIN DEFINITION: VCC is connected to the positive pole of the power supply, GND is connected to the negative pole of the power supply, OUT switch signal output.
BulletPoint7 : PRODUCTS INCLUDE: 5 x Correlation Photoelectric Sensor;5 x Encoders;15 x Male and female cable.
CircuitBreakerType : Standard
Color : LM393
CurrentRating : 1 amps
GpsrSafetyAttestation : 1
IncludedComponents : 5 x Sensor;5 x Encoders;15 x Male and female cable
ItemName : DAOKAI 5 pcs LM393 Photoelectric Sensor H2010 Photoelectric Opposite-Type Count Infrared Sensor Motor Speed Sensor Module with Encoders Cable
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : electronic-component-photoelectric-sensors
Manufacturer : DAOKAI
Material : Copper
ModelNumber : JA-DA-031
MountingType : Surface Mount
NumberOfItems : 5
NumberOfPoles : 1
PartNumber : JA-DA-031
ProductDescription : Specification:
1.The two circular holes of the PCB (the distance from the point to the center of the point) are 15mm, and the aperture is 3mm
2.Slot type optocoupler slot width 10mm
3.Main chip: LM393, slot optocoupler H2010,through-beam infrared head
4.The working voltage: DC 5V

Features:
1.With signal output indication.
2.Single-channel signal output.
3.Output high level (LED light off) when there is an obstruction, and output low level (LED light on) when there is no obstruction
4.The sensitivity is not adjustable.
5.It can be used for workpiece counting and motor speed measurement
6.The circuit board output switch

Package Includes:
5 x Correlation Photoelectric Sensor
5 x Encoders
15 x Male and female cable
ProductSiteLaunchDate : 2023-12-01T07:22:13.832Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 46171600
Voltage : 5 volts