Cart 2 india

Specification
Amperage : 4 amps
Brand : Pongnas
BulletPoint1 : [Multiple Reset Methods] Tailored reset options for diverse requirements.
BulletPoint2 : [Intelligent Functionality] Digital display for convenient motor status monitoring and fault record function for enhanced intelligence.
BulletPoint3 : [Power,down ] The protector ensures motor startup after power loss.
BulletPoint4 : [Comprehensive ] Overcurrent, phase failure, overload, and underload .
BulletPoint5 : [Easy Installation] Rail mounted method for effortless setup.
ExternallyAssignedProductIdentifier : 3606485332499
ItemName : Motor Integrated Protector, 3,Phase Digital Phase,Failure OverorUnder Load Protector AC380V 3,160A, easy installation and intelligent operation with fault record function
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : phase-monitoring-relays
Manufacturer : Pongnas
Material : Plastic
ModelName : Pongnas04krpgnh53
ModelNumber : Pongnas04krpgnh53
NumberOfItems : 1
PackageLevel : unit
PartNumber : Pongnas04krpgnh53
PhaseType : Three Phase
ProductDescription : [Multiple Reset Methods] Tailored reset options for diverse requirements.
[Intelligent Functionality] Digital display for convenient motor status monitoring and fault record function for enhanced intelligence.
[Power,down ] The protector ensures motor startup after power loss.
[Comprehensive ] Overcurrent, phase failure, overload, and underload .
[Easy Installation] Rail mounted method for effortless setup.

Spec:

Item Type Motor Protectorandnbsp;
Item Operating conditions and setting range Action time
Overload (definite time limit) The running current exceeds the set value 0.5,60s
Setting range: 0.3,16A, 3,160A, 10,999A.
Overload (inverse time limit) Operating current exceeds the set value 1,5 tripping curve inverse time limit
Setting range: 0.3,16, 3,160A, 10,999A
Underload The operating current is lower than the set value. Put in after startup. 0.5,60s
The setting range is the same as the overload. Note: The underload value must be less than the overload value.
Phase failure Current imbalance rate exceeds 50% 2s
Current imbalance The current imbalance rate exceeds the set value. Setting range: 10,50% 5s
Unbalance rate = phase current - I average current maximum / I average current x
Start delay During the start,up of the motor, the protector will against overload, underload, locked,rotor, and unbalance . Note: A countdown will occur during the boot process. 0,200s
Locked,rotor The running current exceeds the set overload factor and is put into operation after the startup. 3s
Setting range: 1.5,8 times overload current.
Short circuit The operating current exceeds 10 times the set overload factor. ≤50MS
Leakage The zero sequence current exceeds the set value. Setting range: 30ma,2.5A. 1S
A 5Aor10mA zero,sequence current transformer must be
ProductSiteLaunchDate : 2024-10-15T06:28:06.443Z
Size : 2.5-4A
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27112800
Voltage : 690 volts
Wattage : 1.5 kilowatts