Cart 2 india

Specification
BatteriesRequired : 1
Brand : IgnisAurum
BulletPoint1 : Professional portable bromide ion meter is equipped with Calibration Fluid
BulletPoint2 : 2 to 5 points calibration from low to high concentrations.
BulletPoint3 : Selectable ion measurement units, including ppm, mg/L and mol/L.
BulletPoint4 : Expanded memory stores or recalls up to 500 data sets.
BulletPoint5 : USB communication interface for data transfer or connecting a power adapter to the meter.
Color : Light Blue
ExternallyAssignedProductIdentifier1 : 0093337559549
ExternallyAssignedProductIdentifier2 : 093337559549
IncludedComponents : Nitrate Ion Meter
ItemName : PH Meter, Digital PH Meter, PH Meter for Water, 0.01 PH High Accuracy Water Quality Tester with 0-14 PH Measurement, Water PH Tester Range for Household Drinking, Pool, Aquarium, Hydroponics
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 25 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemTypeKeyword : science-lab-ph-meters
Manufacturer : IgnisAurum
MeasurementAccuracy : /
ModelNumber : 2025050615
NumberOfItems : 1
PartNumber : 2025050615
ProductDescription : Easy to Use & Read:
Once calibrated just turn on and dip. Clear easy to read screen. You could get all readings done very fast.

Right Out of The Box:
Express arrived, it's ready to use right out of the box. Whether it's for testing vegetable seeds, hot tubs, fish tanks, or garden, swimming pools, it will help you.

Say Goodbye for Strips and Test Kits, Enjoy Fast Testing.
Are you struggled with the pH in the pool for too long and splurged. Or needed one device to replace test strips for hydroponics. Yes, you can finish these easily with this digital pH meter .

Easy to Calibrate
►Before calibration, add the pH4.00/pH6.86/pH9.18 calibrate packets into beaker with 250ml of water, then stir until the calibrate packet has completely dissolved.
►Press the ON/OFF button to turn on the pH meter.
►Put the electrode into pH4.00/pH6.86/pH9.18 standard solution, waiting for the readings to stabilize (usually 5~10 Seconds).
►Press and hold the CAL/ATC button and release after 5-6 seconds.
- Display screen will start flashing “6.86”.
- Wait it until the display screen stops flashing.
- Until the readings of pH4.00/pH6.86/pH9.18 is no longer flashing, the calibration of pH4.00/pH6.86/pH9.18 is completed.
►Rinse the electrode with distilled water and make pH Meter dry.

What You Get
1 x PH Meter.
3 x Calibration Packets.
1 x Carrying Case.
1 x User's Manual.

Kindly Remind
1.Please re-calibrate, if the pH tester was used / lay aside long time or replace battery.
2.Please do not touch the electrodes with hard tools or fingers. Put on the protective cap to prevent the electrode from drying out and damaging it.
3.Please do not forget to wipe the pH Meter with clean and soft cloth when you have done before capping it again.
ProductSiteLaunchDate : 2025-05-06T10:36:17.463Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41115603