Cart 2 india

Specification
Brand : Gain Express
BulletPoint1 : Handly all in one instrument (pH / TDS / EC / Temperature / Salinity) with backlight function so you can clearly see the reading even in darker environment.
BulletPoint2 : The unit is factory calibrated, you can use it right away and it has replaceable electrode, no need to buy a whole new set in the future
BulletPoint3 : Automatic Identification 3-Points Calibration for both EC and pH measurement. The whole set comes with free pH buffer powder.
BulletPoint4 : Worry free in using the meter in you analysis it comes with IP67 waterproof and dustproof resistant level
BulletPoint5 : Wide range of application in household, industrial research and engineering, use in hydroponics, aquaculture, aquaponics, and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.
Color : Ph/Tds/Ec/Temp/Salt Meter
CpsiaCautionaryStatement : no_warning_applicable
Directions : How to Use: The test specimen is prepared separately, directly put the color block into the liquid; take out, take out the extra, then the value of the color card is <7 is acidic, =7 is neutral, >7 is The base, the higher the 7, the smaller, the stronger the acidity. Specification: Item Type: Test Paper Material: Paper Weight: Approx. 19g/0.7oz Use Range: As long as it is aqueous solution, it can be measured. 1. Test amniotic fluid, principle (the average person's vaginal secretion is acidic, and amniotic fluid is , alkalinity 7 or more) use cotton to pick vaginal secretions, apply it to the color block, then the color card, find the closest color , Draw a sour alkalin, if the color of no color or 6 or less is not amniotic fluid, 7 or more colors are amniotic fluid 2. Test cosmetics, principle (because the skin of the skin is weakly , so the cosmetic is about 6 or so if there is no damage to the skin (the test strip is not discolored, the is 6, no change is a good cosmetics) On the color block, then the color card, find the closest color, to draw the alkalinity 3. Meat alkalinity: Saliva is applied to the painted block, then the color card, find the closest color, to draw the alkalinity, 4. Truck diadance: Urine is applied to the color block, then the color card, find the closest color, to derive an alkalinity Package List: 1 Roll x Test Paper 1 x Box
ExternallyAssignedProductIdentifier : 4713556901481
ExternallyAssignedProductIdentifier1 : 600316551229
ExternallyAssignedProductIdentifier2 : 0600316551229
FoldedSize : 7.2 x 1.5 x 1.5 inches
IncludedComponents : Multifunction Tester, pH Buffer Powder
ItemName : Pentype Multi-Paramater 5-in-1 Water Quality Tester (pH/TDS/EC/Temp/Salinity) Waterproof Digital Meter Household Industrial Laboratory Analysis
ItemPackageDimensions_Height : 21.59 centimeters
ItemPackageDimensions_Length : 5.207 centimeters
ItemPackageDimensions_Width : 8.2042 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-ph-meters
Manufacturer : Gain Express Holdings
Material : Stainless Steel
ModelNumber : WQM-303
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : WQM-303
PhRange : 0-14
ProductDescription :

This 5-in-1 water quality tester,Factory pre-calibrated

It has the following parameters.

pH - Measure Acidity, Basicity of a solution.
EC - Measure Electrical Conductivity of water
TDS - Total Dissolved Solids in a solution that is also used in the water analysis procedure.
Salinity - Measure the concentration of dissolved salts in water.
Temperature -Temperature is an important key factor in the study of water.

Specifications:

• Measurement range: 
• pH: 0.01~14.0pH; 0.01pH resolution; ±0.05pH accuracy
• EC: 0~10000µS/cm, 10.01~19.99mS/cm, 20.1~400mS/cm (convert range automatically); 1µS/cm, 0.1mS/cm resolution; ±2% F.S. accuracy
• TDS: 0~10000ppm, 10.1~200.0ppt (convert range automatically); 1ppm or 0.1ppt resolution; ±2% F.S. accuracy
• Salinity: 0.01~25.0%, 0~10000ppm, 10.1~200.0ppt; 0.01%, 1ppm, 0.1ppt resolution; 0.01~5.0% (±0.1%), 5.10~25.0% (±1%) ±2% F.S. accuracy
• Temperature: 0.1~60°C (32~140°F); 0.1°C/°F resolution; ±0.5°C accuracy
• Calibration (Automatic Calibration)
• EC: 3 points calibration ( optional solution 1413µS/cm, 12.88mS/cm, 111.8mS/cm)
• pH: 3 points calibration and recognize standard solution automatically (6.86pH, 4.0pH, 9.18pH)
• ATC: 0~60°C
• Waterproof Level: IP67
• Operating Environment: 0~60°C (32~140°F); 100%RH
• TDS Factor: 0.4~1.0

Set Includes:

• 1 x Multifunction Tester
• 3 x pH Buffer Powder
• English Instruction Manual
• Standard factory packaging

ProductSiteLaunchDate : 2020-11-16T10:05:20.400Z
RecommendedUsesForProduct1 : Urine Test
RecommendedUsesForProduct2 : Saliva Test
RecommendedUsesForProduct3 : Cosmetics
RecommendedUsesForProduct4 : Water Test
Size : approx. 183 x 37 x 37mm (7.2 x 1.5 x 1.5in)
Style : Universal
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 46171600