Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : WnewTools
BulletPoint1 : BNC connector, suitable for most PH meter and controller with BNC connector.
BulletPoint2 : 100% Brand new and high quality
BulletPoint3 : Suitable for wide range of application: Aquariums, Hydroponics, Laboratory etc.
BulletPoint4 : Specification:
BulletPoint5 : Measurement Range: 0.00~14.00 PH
BulletPoint6 : Why should i buy Hydrogen water testing kit- As per the many research papers minimum therapeutic value of hydrogen should be 1500 ppb, than only it give you therapeutic health benefits so purchasing this drops you can verify the level of hydrogen in your water. Further this kit includes chlorine residual tester drops by this way you can also check and verify purity of hydrogen in water, 90% bottles sold in United states are NON SPE-PEM hydrogen water bottle hence generates chlorine and mix with hydrogen, further chlorine itself creates many health problems
BulletPoint7 : How do hydrogen water tester measure hydrogen level accurately- Ionrich hydrogen water measuring testing drops is consists of Methylene blue colloidal platinum drops hence, hence H2 concentration in hydrogen reach water observes this platinum colloids of methylene blue and hence after continuing put drops in water than after some drops the water colour becomes blue, which indicates that hydrogen concentrations over. This is only the accurate way testing method to find our accuracy of hydrogen concentration in water.
BulletPoint8 : How accurate are chlorine test drops reading: If you buy chlorine test strips these tests are not accurate as the chemical coated in strips are dried out and hence not shows you accurate level of chlorine measurement. Further Chlorine residual reagents testing drops are accurate to find the level of chlorine in your drinking water, you can test chlorine in aquarium, and best method to test chlorine testing for pool and in your hot bath tub
Capacity : 1 pints
CareInstructions : Hand Wash Only
Color : Silver
ContainsLiquidContents : 1
ExternallyAssignedProductIdentifier : 6131142771870
ExternallyAssignedProductIdentifier1 : 0769902999415
ExternallyAssignedProductIdentifier2 : 769902999415
ExternallyAssignedProductIdentifier3 : 00793950000847
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemName : E-201-C-9 PH Electrode Probe BNC Connector for Aquarium PH Controller Meter Sensor Water Quality Tester
ItemPackageDimensions_Height : 36.2966 centimeters
ItemPackageDimensions_Length : 3.9878 centimeters
ItemPackageDimensions_Width : 5.8928 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-ph-meters
ItemVolume : 44 milliliters
LiquidVolume : 20 milliliters
Manufacturer : Wnew
Material : stainless_steel_304
MaximumFlowRate : 10.5 gallons_per_minute
ModelName : PH Electrode Probe
ModelNumber : ATOOL1499323
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : ATOOL1499323
Pattern : Saturated calomel electrode
PowerSourceType : hand_powered
ProductDescription :

Features:

100% Brand new and high quality

BNC connector, suitable for most PH meter and controller with BNC connector.

Suitable for wide range of application: Aquariums, Hydroponics, Laboratory etc.

Specification:

Measurement Range: 0.00~14.00 PH

Zero-point: 7 +- 0.5PH

Alkali Error: 0.2PH

Theoretical Percentage Slope: ≥98.5%

Internal Resistance: ≤250MΩ

Response Time: ≤1min

Operating Temperature: 0-60ºC

Terminal Blocks: BNC plug

Cable Length: Approx. 70cm

Package Included:

1 x PH Electrode Probe

1 x Calibration Solution

ProductSiteLaunchDate : 2024-10-20T14:04:14.205Z
Reusability : Reusable
Size : NO.3
Style : Above Ground
SubjectCharacter : Conductivity Standard Solution
SupplierDeclaredDgHzRegulation : unknown
TestType : Array
UnitCount : 1
UnspscCode : 53000000
VolumeCapacityName : 44 microliters