Cart 2 india

Specification
Brand : Leeson
BulletPoint1 : KAG Kahlig Antriebstechnik GmbH
BulletPoint2 : Measured Output RPM with No Load: 3 Volt DC - 62 RPM / 24 Volt DC - 540 RPM
BulletPoint3 : MODEL: M48x60/I MPN: M48x60/I+SN22,6+IGM12/2
BulletPoint4 : Overall Assembly Dimensions: 7-3/4" (L) x 2-7/8" (W) x 2" (H)
BulletPoint5 : Package of One Motor per Order
ExternallyAssignedProductIdentifier1 : 0616880105973
ExternallyAssignedProductIdentifier2 : 616880105973
Horsepower : 0.5 horsepower
ItemName : Leeson Electric, 103460.00, .5HP, 1625RPM, 1PH, 115V, 56 Frame, Standard Flange, Foot Mount, DP, Instant Reversing Motor
ItemTypeKeyword : permanent-magnet-motors
Manufacturer : Leeson Electric
Material : Copper
ModelName : gear
PartNumber : 103460.00
ProductDescription : Right Angle Gearhead Motor Assembly Mfr: KAG Kahlig Antriebstechnik GmbH Mfr P/N: M48x60/I+SN22,6+IGM12/2 Package of One Motor per Order Specs: Overall Assembly Dimensions: 7-3/4" (L) x 2-7/8" (W) x 2" (H) Measured Output RPM with No Load: 3 Volt DC - 62 RPM / 24 Volt DC - 540 RPM Brushed DC Motor with Permanent Magnet Ball bearings 11 Inch wire leads with 2-pin molex connector Closed zinc-plated housing with zinc-die-cast bearing flanges Direction of rotation CW / CCW (Depending on polarity of voltage applied to motor) Power output in rated operation: 51.8 Watt Torque: 15 N-cm Rated: 3300 RPM @ 24 Volt DC Rated Voltage: 24 Volt DC (Will work from 3-24 Volt DC) Right Angle Worm Gear Suitable for left or right rotation Gear Reduction: 7:1 429 RPM Output when Motor is at 3000 RPM (24 Volt DC) Continous Torque 75 N-cm Output shaft has timing pulley with 14 teeth pinned to shaft for belt about 5/8" width Output shaft about 5/16" diameter x 1" Long Touchless and Wear Resistant Magnetic Incremental Encoder This encoder supply symmetric amplitude in addiction of supply voltage Open Collector output Integrate Pull-Up Resistors Supply voltage 5-24 Volt DC, Output current 20mA max 12 Impluses per revolution 2 Channel Four 11 Inch wire leads with 5-pin molex connector KAG Kahlig Antriebstechnik GmbH Motor: M48x60/I Gearhead: SN22.6 Magnetic Encoder: IGM12/2
ProductSiteLaunchDate : 2017-11-02T16:51:29.881Z
Speed : 1625 rpm
UnspscCode : 26101208
Voltage : 115 volts