Cart 2 india

Specification
Brand : ZENG WHCD
BulletPoint : B0-57, Square D, B Series, thermal overload heater element, type B, rated for 0.41-0.45 amps, B0.57 suitable for use with thermal overload relays, magnetic motor starters & motor controls
BulletPoint1 : 【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the gear box motor body.
BulletPoint2 : 【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%.
BulletPoint3 : 【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the geared motor power instant increased by 30%.
BulletPoint4 : 【POSITIVE-NEGATIVE ROTATION】: You also can adjust the speed, but the motor speed can only be reduced, can not be raised. Low noise and high torque, such as 10rpm can drive 15 kilograms.
BulletPoint5 : 【RELIABLE GURANTEE】: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!
Color : 12V With Bracket
ExternallyAssignedProductIdentifier : 7596320233639
ExternallyAssignedProductIdentifier1 : 0606246286583
ExternallyAssignedProductIdentifier2 : 606246286583
IncludedComponents : bracket
ItemName : Geared Electric Motor DC 12V 35RPM with Bracket Centric Ouput Shaft Micro Gear Motor Forward and Reverse 37mm Diameter Gearbox Large Torque Reduction Motor JGB37-520 (12V 107RPM JGB37-520)
ItemPackageDimensions_Height : 11.8 millimeters
ItemPackageDimensions_Length : 5 millimeters
ItemPackageDimensions_Width : 7 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : permanent-magnet-motors
Manufacturer : ZENG WHCD
Material : Copper
ModelName : LUISAS
ModelNumber : 12V 107RPM JGB37-520
NumberOfItems : 1
PartNumber : JGB37-520 DC 12V
ProductDescription : Package：
1 pc JGB37-520 motor
1 piece mounting bracket
6 pieces M3 screws
4 pieces M3 screws and nuts
2 pcs 4.8mm reed terminal and sheathed female connector
Scope of application：
Parking locks, intelligent carts, medical devices, intelligent equipment, card dispensers, channel gates, vending machines, packaging machinery, sweepers, etc.
Motor precautions：
1. When you use the motor, there should be no binding objects, such as adhesive should not flow into the bearing through the rotating shaft, which will harm the operation of the motor.
2. The manual rotation of the shaft may have the opposite effect on the life of the motor, in order to extend the life of the motor, please check whether your load is in accordance with the regulations, do not overload or hang the end of the shaft with objects that affect the rotation.
3. Heavy eccentric radiation loads are harmful to the life of the motor.
4. Do not store the motor in high temperature or extreme humidity, or in corrosive gas, which will reduce the motor's effectiveness.
5. Do not run the motor in high temperature and humidity.
6. When soldering the motor terminals of positive and negative power supply, the temperature of the soldering iron should be 340°C to 40°C and the heating time should be within 3 seconds.
7. Do not allow the motor shaft to jam, when the power is transferred, the motor will overheat in a short time and burn its accessories.
8. Supply the specified power and be sure that it is within the measurable range. Do not press the pulley or gear into the motor with abnormal weight.
9. When installing the motor, the screws are too long, which may cause contact between the motor itself and the rotor, and may affect the characteristics.
ProductSiteLaunchDate : 2024-09-07T03:07:00.514Z
Size : 1 Ratio 27
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26101200
Voltage : 12 volts_of_direct_current
Wattage : 10 watts