Cart 2 india

Specification
Brand : Ylwxzenith
BulletPoint : Permanent Magnet Motors
BulletPoint1 : HIGH PERFORMANCE: The DC Gear Motor features two high-performance magnets, enhancing motor efficiency with high remanence, coercivity, and magnetic energy product. Ideal for applications requiring high torsion and stability.
BulletPoint2 : DURABLE AND QUIET: Equipped with all-metal gears and high-temperature grease, this motor ensures low friction, noise reduction, and slow temperature rise, significantly extending the gear's service life.
BulletPoint3 : OVERLOAD PROTECTION: Automatically cuts off power at 3A to prevent burnout, ensuring the motor's longevity and safe operation in demanding environments.
BulletPoint4 : EFFICIENT CONDUCTIVITY: Utilizes pure copper coils in the stator and rotor, enhancing deceleration and conductivity, which increases the motor's torsion and overall performance.
BulletPoint5 : VERSATILE APPLICATION: Suitable for a wide range of industrial uses, this motor is designed for environments requiring precise speed control and high durability, making it a choice for various mechanical applications.
Color : 300w
ExternallyAssignedProductIdentifier : 7695920054306
IncludedComponents : No
ItemName : DC Gear Motor Low Speed Micro Permanent Magnet 12V XD37GB3530, DC Low Speed Motor with Bracket Governor Gear, High Torsion and Overcurrent Protection for Industrial Applications (30rpm/min)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : permanent-magnet-motors
Manufacturer : Ylwxzenith
ModelName : Ylwxzenith8vud3qs25e-14
ModelNumber : Ylwxzenith8vud3qs25e-14
NumberOfItems : 1
PartNumber : Ylwxzenith8vud3qs25e-14
ProductDescription : Item Type: DC Gear Motor
Model: XD-37GB3530
Material: Copper
Output Shaft Size: Approx. 5.5 x 15mm / 0.2 x 0.6in
Insulation : After the rated operation of the motor under normal temperature and humidity, when measuring the insulation between the coil and the motor with a DC500V meter, it does not exceed 20MΩ
Insulation Withstand Voltage: After the rated operation of the motor under normal temperature and humidity, 50Hz or 60Hz is applied between the coil s for one minute, and the abnormality is 1500V.
Temperature Rise: It is normal to install a gear box or equivalent heat sink and conduct rated operation under normal temperature and humidity by using the to measure the temperature rise of the coil below 70℃
Insulation Class: Class B(130℃)
Operating Environment Temperature: Motor: -10~+40℃ (no icing)
Use Environment Humidity: 85% or less (no condensation)
CW/CCW: Yes
Speed Adjusted: Yes
Governor Voltage: DC12-24V
Speed Adjustment Range: 0-
Gear Model: CN1001
Gear Center Hole: Approx. 6mm / 0.2in
Notes:
1 Overload and Locked Rotor:
When the motor is running, it generates heat due to the energy conversion that occurs inside the coil and the iron core, and the temperature gradually rises. The load is within the rated range, and the heat generation and heat dissipation are balanced, and the coil of the motor will not be burnt. However, it will cause heat under overload and locked-rotor conditions. When the running time is too long, the insulating film on the enameled wire of the coil is dissolved, causing a short circuit between the enameled wires and burning the motor.
2 When Running at Low Speed:
For DC motors, carbon brushes are generally used. The rotating commutator rubs against the carbon brushes, creating sparks at the notches of the commutator. When the motor is running at a low speed, the carbon brush powder that is easily generated by the friction between the
ProductSiteLaunchDate : 2025-04-27T06:52:26.042Z
Size : 12v
Style : 30rpm/min
UnitCount : 1
UnspscCode : 49201501
Voltage : 110 volts
Wattage : 500 watts