Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Fiberglass Supply Depot
BulletPoint : New
BulletPoint1 : Patch Aid is designed to improve the working properties of traditional gel coat spray patches. This is achieved by thinning the gel coat, minimizing orange peel, speeding the cure, and reducing surface tackiness.
BulletPoint2 : Patch Aid also eliminates the need to thin, side-promote or add wax to gelcoats prior to patching.
BulletPoint3 : Good surface cure, which minimizes sandpaper "gumming". Excellent sanding and buffing.
BulletPoint4 : Light stabilized, to minimize discoloration of patches made using clear and pigmented gel coats.
BulletPoint5 : Low color, which results in excellent spray patches Low viscosity, for easier spray and less orange peel
Color : TRANSLUCENT CORAL
ColorCode : #cddae0
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Fabric
Coverage : 350-400 square feet per gallon
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 819794022811
ExternallyAssignedProductIdentifier2 : 0819794022811
ExternallyAssignedProductIdentifier3 : 00819794022811
FinishType : Flat
Hazmat1 : RESIN SOLUTION,
Hazmat10 : CN_GroundOnly
Hazmat11 : DE_LimitedQuantity
Hazmat12 : EG_LimitedQuantity
Hazmat13 : ES_LimitedQuantity
Hazmat14 : FR_LimitedQuantity
Hazmat15 : GB_LimitedQuantity
Hazmat16 : IN_GroundOnly
Hazmat17 : IT_LimitedQuantity
Hazmat18 : JP_GroundOnly
Hazmat19 : MX_LimitedQuantity
Hazmat2 : UN1866
Hazmat20 : NL_LimitedQuantity
Hazmat21 : PL_LimitedQuantity
Hazmat22 : SA_LimitedQuantity
Hazmat23 : SE_LimitedQuantity
Hazmat24 : SG_LimitedQuantity
Hazmat25 : TR_LimitedQuantity
Hazmat26 : US_ORMD
Hazmat27 : ZA_LimitedQuantity
Hazmat3 : III
Hazmat4 : 3
Hazmat5 : AE_LimitedQuantity
Hazmat6 : AU_LimitedQuantity
Hazmat7 : BE_LimitedQuantity
Hazmat8 : BR_LimitedQuantity
Hazmat9 : CA_LimitedQuantity
ImportDesignation : Made in the USA
IncludedComponents : AB glue, sandpaper, mixing stick, textured paper, PVC gloves, acrylic paint
IndoorOutdoorUsage : outdoor
ItemForm : Liquid
ItemName : Fiberglass Supply Depot Patch Booster (Patchaid) for Gelcoat - Quart
ItemPackageDimensions_Height : 27.7114 centimeters
ItemPackageDimensions_Length : 10.9982 centimeters
ItemPackageDimensions_Width : 12.3952 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boating-painting-supplies
ItemVolume : 16 fluid_ounces
Manufacturer : Fiberglass Supply Depot Inc.
Material : PATCHAID
ModelName : Patch Booster (Patchaid)
ModelNumber : PTT 710016
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PaintType1 : Spray
PaintType2 : Oil
PartNumber : 710016
Pattern : Solid
ProductDescription :

Patch Aid is designed to improve the working properties of traditional gel coat spray patches. This is achieved by thinning the gel coat, minimizing orange peel, speeding the cure, and reducing surface tackiness.

Patch Aid mixed with gel coat will provide these properties:

Low color, which results in excellent spray patches
Low viscosity, for easier spray and less orange peel
Longer working time, advantageous for repairing large defects and for mold resurfacing.
Light stabilized, to minimize discoloration of patches made using clear and pigmented gel coats.
Good surface cure, which minimizes sandpaper "gumming".
Excellent sanding and buffing.
Easy mold resurfacing.
Patch Aid also eliminates the need to thin, side-promote or add wax to gelcoats prior to patching.

Application guidelines

1. Mix patch aid thoroughly.
2. The recommended ratio mix 25%-33% Patch Aid to gel coat. To this mix, add correct amount of MekP Hardener/Catalyst. Mix and spray.
3. The acceptable method for measuring small quantities of MEKP is with a syringe. Even a thinly sprayed layer will be ready to sand in approximately one hour and hard enough to buff soon thereafter.
4. Care must be taken not to over-or under-catalyze, which may affect color.
5. Working time is approximately five minutes.

Precautions: Always shake or mix before using. This assures a uniform mixture that will perform the same, from the first patch to the last. If Patch Aid has been allowed to become cooler than 70 F, it could become cloudy and, at this point, would no longer be a homogeneous solution. The material should be brought to room temperature and returned to its original appearance before using. Catalyzed masses get very hot as they cure. Excess catalyzed patching materials should be placed in a bucket of water to cool.

ProductSiteLaunchDate : 2020-12-17T16:14:02.007Z
SafetyDataSheetUrl : http://www.totalboat.com/wp-content/uploads/2019/01/TotalBoat-Wet-Edge-Flat-Gray-SDS-v.TB_.pdf
Size : 128 Fl Oz (Pack of 1)
SpecificUsesForProduct : Exterior
SpecificUsesForProduct1 : Tile Repair
SpecificUsesForProduct2 : Woodworking
SpecificUsesForProduct3 : Flooring
SpecificUsesForProduct4 : Masonry
SpecificUsesForProduct5 : Countertop
SupplierDeclaredDgHzRegulation : transportation
SupplierDeclaredDgHzRegulation1 : ghs
SupplierDeclaredDgHzRegulation2 : transportation
SurfaceRecommendation : Doors
UnitCount : 128
UnspscCode : 31211500
Viscosity : Medium to High Viscosity
WarrantyDescription : 30 days from date of purchase
WaterResistanceLevel : waterproof