Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : Fasco Epoxies
BulletPoint : Price For: Each
BulletPoint1 : High Impact Resistance
BulletPoint2 : Saltwater/Freshwater Resistant
BulletPoint3 : Excellent adhesion to Wood, Steel, Aluminum, Soft Metals, Concrete, Ceramic, Fiberglass, Composites
BulletPoint4 : Low Shrinkage; Withstands Wide Range of Temperatures
BulletPoint5 : Can be Mixed with Sand to Create a High Strength Mortar for Concrete Repair
Capacity : 0.5 pints
Color : HOT ROD WHITE INBOARD ENAMEL PAINT
ExternallyAssignedProductIdentifier : 7434097139139
ExternallyAssignedProductIdentifier1 : 0819794022101
ExternallyAssignedProductIdentifier2 : 819794022101
FinishType : Gloss
FitType : Vehicle Specific
Hazmat : 9
Hazmat1 : auto-grounding
Hazmat10 : EG_NoAir
Hazmat11 : ES_NoAir
Hazmat12 : FR_NoAir
Hazmat13 : GB_NoAir
Hazmat14 : IN_NoAir
Hazmat15 : IT_NoAir
Hazmat16 : JP_NoAir
Hazmat17 : MX_NoAir
Hazmat18 : NL_NoAir
Hazmat19 : PL_NoAir
Hazmat2 : 3
Hazmat20 : SA_NoAir
Hazmat21 : SE_NoAir
Hazmat22 : SG_NoAir
Hazmat23 : TR_NoAir
Hazmat24 : US_NoAir
Hazmat3 : AE_NoAir
Hazmat4 : AU_NoAir
Hazmat5 : BE_NoAir
Hazmat6 : BR_NoAir
Hazmat7 : CA_NoAir
Hazmat8 : CN_NoAir
Hazmat9 : DE_NoAir
ItemDisplayWeight : 1 pounds
ItemForm : Powder
ItemName : Fasco Epoxies #103LVX 2:1 Marine Grade Epoxy for Fiberglass, Cloth, Wood, Boat Building and Repair (3 Gallon Kit Medium Hardener)
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : boating-painting-supplies
Manufacturer : Fasco Epoxies Inc.
Material : Resin
ModelNumber : Fibreglass Evercoat 108000; Seacare Gel
NumberOfItems : 1
PaintType : Spray
PartNumber : LNS-75-108000
Pattern : Solid
ProductDescription : 103 LVX Epoxy laminating epoxy is a new and improved formula. It provides high tensile strength while maintaining a very low viscosity to aid in wetting out fiberglass. This enables the laminator to produce high tensile strength lay-ups with maximum “wetting out” and a minimum of bubbles.
103 LVX can be used on warehouse docks, floors, sidewalks, walls, and concrete. 103 LVX can be mixed with sand to fill in large holes and cracks in concrete and has enough strength to withstand heavy forklift traffic. 103 LVX seals against leaks without shrinkage and is also used to laminate fiberglass cloth to existing fiberglass, wood, metal, or concrete.

Application: Mix very well, scraping down the sides of the mixing bucket to ensure that all of the resin and hardener gets mixed together.
Application for Heavy Duty Non-Skid Surface for Metal, Concrete, Wood, or Fiberglass:
1. Surface must be clean, dry, and free from oil or grease.
2. Mix the 103 LVX kit. Roll or brush evenly on surface.
3. While epoxy is wet, broadcast quartz aggregate evenly on surface (other non-skid particles may be substituted for quartz). The epoxy should stay wet enough to receive the aggregate for at least 1 hour. Use aggregate size in accordance to roughness desired - #30-65 aggregate is an average non-skid surface.
4. Continue above procedure until entire surface is covered with aggregate.
5. Allow to dry. Sweep off loose aggregate.
6. Apply a thin coat of mixed 103 LVX epoxy over the aggregate surface. Squeegee the epoxy down tight so that there are no puddles of epoxy. The surface should have an even textured appearance.
Working Time: Mixed product must be used within 20 min.
Gel Time Thin Coats 1-2 hours - Thick Coats 20-25 Min.
Set Time Thin Coats 4-6 hours - Thick Coats 2-4 Hours.
Cure Time 24 to 72 Hours
ProductSiteLaunchDate : 2018-08-13T07:00:00.000Z
Size : 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 49000000
VolumeCapacityName : 3 gallons