DQUONLOV DGK-01 220VAC Ultra-Small Digital MonoPhase Overvoltage & Undervoltage Protection Relay

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 18100/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : DQUONLOV
BulletPoint : Overload Relays
BulletPoint1 : Relay
BulletPoint2 : 1PC FITS LRD02 THERMAL OVERLOAD Relay 0.16-0.25A use for LC1D09-38
Color : One Color
ExternallyAssignedProductIdentifier : 8047288308499
ItemName : DQUONLOV DGK-01 220VAC Ultra-Small Digital MonoPhase Overvoltage & Undervoltage Protection Relay
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : overload-relays
Manufacturer : DQUONLOV
ModelName : DQUONLOV
ModelNumber : DQUONLOV
NumberOfItems : 1
PartNumber : DQUONLOV
ProductDescription : Overload Relays
General
DGK-01 and DGK-01W voltage control relays are designed to block monophse loads malfunctions arising from network.
Usage and Working Principle
To set the high voltage value: set the "U>" control knob to the desired value.
<;;" control knob to the desired value.
To set the delay time: set the "t" control knob to the desired value.
The set values is displayed on the display when adjusting with the setting knobs.2 seconds after releasing the set knob then on the display shows the measured voltage value.
<;;" voltage set values, the "Out" LED turns on and the relay is energised.
Protection Functions
High Voltage Protection - To enter the error state: lf the voltage goes above the high voltage set value, the "U>" LED is on, the device waits until the set delay time "t", after the time has elapsed the relay gets de-activated and the "Out" LED is off.
High Voltage Protection - Exiting the error state: When the voltage drops below 5V of the high voltage set value, the device waits for the delay time "t". After the time passes, the "U>" LED is off, the relay gets activated and the Out LED is on.
<;;" LED is on, the device waits until the set delay time "t", after the time has elapsed the relay gets de-activated and the "Out" LED is off.
<;;" LED is off, the relay gets activated and the "Out" LED is on.
Relay States
Relay is Activated: 2(COM) and 3(N
ProductSiteLaunchDate : 2024-10-24T08:38:19.286Z
Size : One Size
UnitCount : 1
UnspscCode : 39122300

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.