Cart 2 india

Specification
Brand : KELFEEAO
BulletPoint1 : Universal Compatibility: Our HUD automatically adapts to various car models and is compatible with vehicles equipped with OBD II or EUOBD systems, ensuring plug-and-play functionality for seamless integration.
BulletPoint2 : High-Definition 3-Inch Display: Featuring a 3-inch screen with high-definition display, our obdii hud heads up display presents information in rich detail, making it easier and more enjoyable to read while driving.
BulletPoint3 : Advanced Nanotechnology: Utilizing nanotechnology, our HUD eliminates unwanted reflections, resulting in sharper display information and reduced glare for improved visibility in different driving conditions.
BulletPoint4 : Rich Display Content: Our HUD head up display offers a wealth of information including speed, engine speed, water temperature, battery voltage, and various alarms such as low voltage, high temperature, and speed alarms. Additionally, it allows for free switching between kilometer and mile units, as well as Celsius and Fahrenheit temperature units.
BulletPoint5 : Smart Power Management: With auto power on and off functionality, our obdii hud heads up display activates and deactivates with vehicle ignition, effectively preserving the car battery. For added convenience, it also includes a manual switch mode for easy control.
Color : popular
ItemName : OBDII HUD Heads Up Display for Car Truck Color Head Up Display LED Projector Speed Warning System for Car Trucks
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-overhead-video
Manufacturer : KELFEEAO
PartNumber : KELFEEAOiovbp9u40m
ProductDescription : Technical parameter:
Environment temperature: - 40℃ to +80℃
Barometric press: 86-106KPa
Relative humidity: 10%-95%
Environment voice: <=60dB
Alarm of sound level: >=30dB(A)
Work voltage: 9V~16Vdc(12Vdc/400mA)
Size of product: 9*5.4*1.2(cm)
 
Methods of pasting the film:
1.Spray some water on the place that the film will be pasted on,and then use a dry towel to clean it;
2. Tear off the back side（marked 1) of reflection film,then paste it to the right place.
3. After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
4. Tear off the front side (marked 2) of the reflection film. If the film cannot display the whole information, please adjust the non-slip mat.

Package Includes:
1 x Head Up Display
1 x Reflection Film
1 x Non-slip Mat
1 x OBD Cable
1 x Manual

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.



ProductSiteLaunchDate : 2024-02-18T09:37:07.740Z
Size : normal
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000