Cart 2 india

Specification
Brand : Pissente
BulletPoint1 : [Adaptive Light Detection] - Clear backlight during the day, soft at night without glare.
BulletPoint2 : [Multi-function display]: shows vehicle speed, water temperature, voltage and mileage.
BulletPoint3 : [High Definition Display] - Clear, no ghosting, with host + reflective film for clear backlight.
BulletPoint4 : [Alarm Function] - Alerts for speeding, water temperature, voltage, driving fatigue and failure.
BulletPoint5 : [Wide Application] - Suitable for cars with interface and OBD2 protocol.
Color : Black
ExternallyAssignedProductIdentifier : 4714137915408
ExternallyAssignedProductIdentifier1 : 0799748218203
ExternallyAssignedProductIdentifier2 : 799748218203
IncludedComponents : No
ItemName : OBD2 HUD Multi Function Gauge with Alarm, Voltage, Mileage High definition Clear Display, Suitable for Cars with OBD2 Interface
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-overhead-video accesorios-de-sonido-e-imagen
Manufacturer : Pissente
Material : Plastic
MeasurementAccuracy : +/-5%
ModelName : Pissentey53e4wzoha
ModelNumber : Pissentey53e4wzoha
NumberOfItems : 1
PartNumber : Pissentey53e4wzoha
ProductDescription : Item Type:
Material: Electronic.
Function: Vehicle speed, water temperature, voltage, mileage per trip
Alarm: Overspeed alarm, water temperature alarm, voltage alarm, fatigue driving reminder, fault alarm
Assembly:
OBD2 gasoline vehicles produced in the United States after 2004 and OBD2 agreement gasoline vehicles produced in other regions after 2008.

How to use:
1. First look for the OBD interface of the car and connect the OBD cable to the meter.
2. Stick the reflective film on the front windshield.
3. Start the car and turn it on, adjust the angle of the host and fix it with double-sided tape.
4. Installation is completed after hiding the wire harness.

Packing List:
1 x Host.
1 x Reflective film.
1 x OBD cable.
1 x Double Sided Tape
1 x Manual

How to use:
Specific method to change the speed unit: hold down the M key to enter the configuration item and then briefly press the + key several times, set to the setting item 8, and then briefly press M to confirm, press the + key to set the parameter to 1 (parameter 0=KM/ 1=MPH) and then long press M to save it.
ProductSiteLaunchDate : 2025-03-17T02:55:54.392Z
Size : Onesize
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41110000