Cart 2 india

Specification
Brand : ZIZEV
BulletPoint1 : ▶ Outside Micrometer ◀ The measuring exterior of the micrometer is made of carbon steel, which is corrosion‑resistant and not easy to deform, and will not wear out for a long time.
BulletPoint2 : Laser Calibration Technology: Using laser calibration technology, the accuracy is greater than 0.01mm, and the measurement data is more accurate. Laser scales are mainly used for outer diameter measurement.
BulletPoint3 : Durable Quality: The micrometer is made of high strength materials, durable and anti fall. It can be used for a long time and can withstand the test of various working environments. It is your trustworthy assistant.
BulletPoint4 : The micrometer is a precise mechanical structure locking device, and the reading is more intuitive and accurate.
BulletPoint5 : The body of the micrometer is very glossy, and it moves more smoothly on the workbench without being obstructed.
IncludedComponents : No
ItemName : Micrometer Spiral Outs Instrument Standard Rods
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 11 centimeters
ItemTypeKeyword : outside-micrometers
Manufacturer : ZIZEV
MeasurementAccuracy : 0.1mm
ModelNumber : ZIZEVst4z2uc0kp
NumberOfItems : 1
PartNumber : ZIZEVst4z2uc0kp
ProductDescription : 1. The measuring exterior of the micrometer is made of carbon steel, which is ?resistant and not easy to deform, and will not wear out for a long time.
2. Using laser calibration technology, the accuracy is greater than 0.01mm, and the measurement data is more accurate.
3. The body of the micrometer is very glossy, and it moves more smoothly on the workbench without being obstructed.
4. The micrometer is a mechanical structure locking device, and the reading is more intuitive and accurate.
5. The measuring range is 50-75mm, and the application range is wide, and it can measure various outer diameters.

Specification:
Item Type: Micrometer
Range: Approx. 50-75mm / 2-3in
Material: Carbon steel
Resolution: Approx. 0.01mm
Error: Approx. ±0.04mm
Scale Technology: Laser scale
Measurement Type: Outer diameter measurement
How to use:
1. For zero calibration, ensure that the front of the micrometer cylinder is aligned with the horizontal engraved line, and the main axis scale is aligned with the zero scale of the micrometer cylinder. The first step to correct the degree is to ensure that the zero calibration is correct.
2. When measuring an object, first rotate the ratchet to adjust the distance between the side drill and the side micro screw to be slightly larger than the size of the object, and put the object to be measured into it.
3. Slowly rotate the ratchet until it clicks, and the reading starts. The click indicates that it has been locked, and it is not necessary to rotate it too hard, otherwise it will cause damage.
4. First, read the graduation value of the scale line under the fixed casing with the end of the microtube as the guideline, and then use the horizontal line on the fixed casing as the reading guideline to read the graduation value on the movable scale. , The reading should be read to one-tenth of the minimum degree.

packing list:
1 x Micrometer
1 x Wrench
1
ProductSiteLaunchDate : 2024-03-30T00:29:59.741Z