Specification Amperage : 20 amps Brand : Greenfield BulletPoint1 : Made in USA BulletPoint2 : Complete duplex outlet kit BulletPoint3 : Professional grade quality BulletPoint4 : Cast metal construction BulletPoint5 : Gray in Color Capacity : 31 cubic_inches Color : Gray CompatibleDevices : All ConnectivityTechnology : USB ConnectorType : USB ExternallyAssignedProductIdentifier1 : 750762270615 ExternallyAssignedProductIdentifier2 : 750762170618 ExternallyAssignedProductIdentifier3 : 0750762170618 ExternallyAssignedProductIdentifier4 : 0750762270615 ExternallyAssignedProductIdentifier5 : 00750762270615 FinishType : Painted IncludedComponents : Sigma Electric,Gray Engineered Solutions,14353-5 3/4-Inch 5 Hole 2-Gang Box InstallationType : Screw-In ItemName : Made in USA Weatherproof Electrical Outlet Box, Box Cover & Duplex Outlet Kit Gray ItemPackageDimensions_Height : 5.334 centimeters ItemPackageDimensions_Length : 21.844 centimeters ItemPackageDimensions_Width : 20.574 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : electrical-outlet-boxes Manufacturer : Greenfield Material : Metal ModelNumber : KDHBP NumberOfItems : 1 PackageLevel : unit PartNumber : KDHBPU PowerPlugType : no_plug ProductDescription : INSTALLATION STEP: 1. Prior to installation, a professional granite cutter should cut a square hole in the desired location of the receptacle, the size of the hole is 4-1/16" X 4-1/16" 2. Always use the supplied steel box, for the floor installation, secure the steel box on the bottom of the hole by the two screws provided. If you install on the countertop, it is necessary to install the tab provided to the steel box, then use the construction adhesive or glue to attach the steel box to the countertop. 3. Run wire into the 1/2" knock out the side of the box furthest away from the front of the countertop, if the knockouts are used closest to the front of the counter, the unit will not open because of interference. Note: For the countertop installation, the steel box should be placed at the back of countertop. 4. Only use 9 or 10 gauge stranded U.L.listed wire, strip the wires and insert the stripped wire into the quick connect terminal box making sure that no striped wire is exposed, tighten the screws to secure the wires to the terminal block. Note: Any excess wires should be pushed out of the box or made to be as flat as possible on the bottom of the steel box. Failure to push the wires out of the box or make it flat in the box will interfere with the opening mechanism and the unit will not be able to pop open. 5. Pop up the receptacle and line up the two screw holes with the thread holes in the steel box and then fasten by 2 screws provided. 6.Open and close the unit: Pulling the opening tab until the outlet completely open and close to the its lock place. ProductSiteLaunchDate : 2009-11-30T00:00:01-00:00 Size : 1 Gang box SpecificationMet : Ul Style : Compact SupplierDeclaredDgHzRegulation : not_applicable TotalPowerOutlets : 2 UnitCount : 1 UnspscCode : 39121300 Voltage : 125 volts