Cart 2 india

Specification
Brand : GoMax
BulletPoint : 【Build to Last】 This outboard motor is made of high-quality aluminum with high hardness, wear resistance, anti-rust, and anti-corrosion properties, and long service life.
BulletPoint1 : Features 360 degree steering rotation for reverse
BulletPoint2 : Start-In-Gear protection/clutch feature prohibits prop rotation while idling
BulletPoint3 : Lift/Tilt feature for shallow water operation and convenience
BulletPoint4 : Standard CDI ignition system for easy starting and improved performance
BulletPoint5 : Vertical mount engine design for increased power, performance and durability
BulletPoint6 : 4Hp Outboard
Color : 2-Stroke 6HP
EngineDisplacement : 102 cubic_centimeters
EngineType : 2 Stroke
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier1 : 796713592887
ExternallyAssignedProductIdentifier2 : 0796713592887
FitType : Universal Fit
FuelCapacity : 1.2 liters
FuelType : Gasoline
Hazmat1 : ENGINE, INTERNAL COMBUSTION, FLAMMABLE LIQUID POWERED
Hazmat10 : DE_NoAir
Hazmat11 : EG_NoAir
Hazmat12 : ES_NoAir
Hazmat13 : FR_NoAir
Hazmat14 : GB_NoAir
Hazmat15 : IN_NoAir
Hazmat16 : IT_NoAir
Hazmat17 : JP_NoAir
Hazmat18 : MX_NoAir
Hazmat19 : NL_NoAir
Hazmat2 : UN3528
Hazmat20 : PL_NoAir
Hazmat21 : SA_NoAir
Hazmat22 : SE_NoAir
Hazmat23 : SG_NoAir
Hazmat24 : TR_NoAir
Hazmat25 : US_NoAir
Hazmat3 : 3
Hazmat4 : AE_NoAir
Hazmat5 : AU_NoAir
Hazmat6 : BE_NoAir
Hazmat7 : BR_NoAir
Hazmat8 : CA_NoAir
Hazmat9 : CN_NoAir
IncludedComponents : 1*Outboard Motor 1*Tool Kit 1*Fuel Oil Mixing Bottle 1*Funnel 1*Spare Pull Rope 1*English Manual
IncludedComponents1 : 1x Outboard Motor 1x Fuel Tank 1x English Manual
IncludedComponents2 : 1x Flameout Rope 1x Oil Pipe 1x Sealing Ring
IncludedComponents3 : 1x Tool Kit 1x Paper Pad 1x Spark Plug
IncludedComponents4 : 1x Start Rope 1x Water Pump Impeller 1x Cotter pin
IsAssemblyRequired : 1
ItemName : New 52cc 2 Stroke Gas Outboard Motor 3.5 HP Adjustable Base and Height Jon Boat, Zodiac, Dingy
ItemPackageDimensions_Height : 93.98 centimeters
ItemPackageDimensions_Length : 25.4 centimeters
ItemPackageDimensions_Width : 34.29 centimeters
ItemTypeKeyword : outboard-motors
ItemTypeName : outboard motor
LegalComplianceCertifications : CARB Compliance Certificate
LegalComplianceCertifications1 : EO Q-09-001A
LegalComplianceCertifications2 : CARB Compliance Certificate
Manufacturer : Generic
Material : Aluminum
Material1 : Plastic
Material2 : Aluminum
MaximumHorsepower : 3.5 horsepower
ModelName : outboard motor
ModelNumber : 4-Stroke 3.6HP
MountingType : Engine Mount
MountingType1 : Engine
MountingType2 : Transom
MountingType3 : Bow
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Manual
PartNumber : OT-0
ProductDescription : Displacement: 52cc,3.5HP Engine:1E44F-6,2-stroke,air-cooled Rated output power: 3.5HP/6500rpm Max. Engine speed:8000/rpm Fuel tank capacity:1200ml oil/Gasoling Mixing Ratio: 1:25 Shaft length:87cm Pipe diameter:28mm Handle length:55cm Propeller diameter:180mm 360°rotary handle with self lock G.W./N.W:9.5/8.0kgs " Starting Procedure: 1. Lower engine to running position and check the following Fuel level Engine mount secure Propeller clear 2. Loosen air-vent screw on fuel tank cap by 2 or 3 turns (if fitted) 3. Firmly connect fuel hose to both fuel tank and engine 4. Squeeze primer bulb until it becomes firm 5. Make sure throttle grip on handle in START position 6. Clip lock plate onto emergency-stop switch and tie lanyard to your wrist 7. Pull out choke if starting cold engine 8. Start motor by pulling starter handle (manual start) 9. Push choke back in 10. Check fuel pump to ensure membrane is not torn out 11. Check carburetor to ensure that draining screw is not opened Mounting An Outboard Motor: The method of securing an outboard motor to the vessel. Use of hand-tightened screw thread clamps. These clamp the transom of the vessel between the engine mounting bracket and the screw thread plates. Their tightness should be checked each time the engine is used. A safety rope or chain should also be used to secure the motor to the vessel and prevent the motor from dropping from the boat if the clamps get loose during vessel operation. On larger outboard motors, the mounting bracket is usually bolted through the transom plate. This is a more secure method, but regular checks must be made for looseness. Trim Angle: By changing the outboard motor’s drive angle, the vessel’s bow can be made to rise or fall. The performance and stability of a vessel depends a great deal on correctly trimming the outboard. The correct trim angle depends on the vessel ’ s handling characteristics, the size of the outboard, the sea and loading conditions. Care must therefore be taken
ProductSiteLaunchDate : 2020-06-05T00:53:33.742Z
RecommendedUsesForProduct : ‎For Inflatable Boats, For Small Yachts
RecommendedUsesForProduct1 : For Canoe
RecommendedUsesForProduct2 : For Salt Water
RecommendedUsesForProduct3 : For Fresh Water
RegulatoryComplianceCertification : PSDOS.0565GA-006
RegulatoryComplianceCertification1 : Q-09-001A
RegulatoryComplianceCertification2 : PSDOS.0565GA-006
RequiredProductComplianceCertificate : CE
Size : 3.6HP 2-Stroke
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
Voltage : 24 volts
WarrantyDescription : One year warranty