Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : DICN
BulletPoint1 : Trunk Floor Style Cargo net for Volvo XC90
BulletPoint2 : Production Years : 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025
BulletPoint3 : Cargo Net Material Color : Black / Installation Time: 1 Minute
BulletPoint4 : Great storage solution to help you drive organized & be clutter-free!
BulletPoint5 : The days of groceries rolling around on the drive home are over.
BulletPoint6 : Note: For Sale Cargo Net ONLY. Net has 2 hooks on top and 2 hooks on bottom!
Color : black
CompatibilityOptions : For Ford Ranger 2019-2025
CompatibilityOptions1 : Pet blocking
CompatibilityOptions2 : Garden Wagon
CompatibilityOptions3 : Doll storage
CompatibleWithVehicleType : Car
CompatibleWithVehicleType1 : Motorcycle
CompatibleWithVehicleType2 : Car
CompatibleWithVehicleType3 : Wagon
ExtendedLength : 3 feet
ExternallyAssignedProductIdentifier : 00840182305988
ExternallyAssignedProductIdentifier1 : 734010482500
ExternallyAssignedProductIdentifier2 : 0734010482500
IncludedComponents : x1 Cargo net | x4 hooks | x3 locks
ItemName : Car Scissor Jack Lift Leveling with Crank Handle Roadside Emergency for Honda Civic/Accord/CR-V/Element/Odyssey/Pilot, 2-Ton Max. 360mm Work Height
ItemPackageDimensions_Height : 240 millimeters
ItemPackageDimensions_Length : 470 millimeters
ItemPackageDimensions_Width : 100 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : scissor-lift-jacks
LoadCapacity : 2.0 tons
Manufacturer : DICN Factory
Material : Alloy Steel
Material1 : Nylon
Material2 : Polyester
Material3 : Elastic
Material4 : Stretchable
MinimumHeight : 90 millimeters
ModelName : Envelope Style Truck Pickup Trunk Bed Mesh Cargo Net
ModelNumber : FloNet_xc90_15-21
NumberOfItems : 1
OemEquivalentPartNumber : FloNet_xc90_15-21
PartNumber : scissor jack
ProductDescription : Package included:
Scissor jack x 1
Handle x 1

Specification:
Condition: Brand new
Minimum height: about 105MM
Maximum height: approximately 385MM
Lifting: 2T
Color: Black
Material: Steel
Net weight: 2.1KG
Item Size: 35*8.5*8.5CM

HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.

OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

CARE AND MAINTENANCE
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.

Size : Scissor Jack
Style : Scissor Jack
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 24101600
WarrantyDescription : 6 mounth