Cart 2 india

Specification
AutomotiveFitType : universal_fit
Brand : BANGTING
BulletPoint1 : 【A Must Have for Your Vehicle】many of you may know, there are specific jack points for the vehicle model 3/Y/X/S from 2016 to 2025. Without an adapter, you may risk damaging the battery of the vehicle when raising it to rotate tires.
BulletPoint2 : 【Protect Battery and Paint From Damage】the rubber O-ring helps you preinstall the lift adapter which allows for an easy placement of either the floor jack or lift.
BulletPoint3 : 【Easy to Use】The Chirano Lifting Jack Pad Set is incredibly easy to use, even for those with minimal experience. Simply place the jack pads into the designated jack points on your Tesla Model 3/Y/X/S, and you're ready to lift.
BulletPoint4 : 【Durable Material】 The rubber support frame is made of durable material. The rubber pad prevents your frame rails and pinch seams from bending when you lift your car with a jack. Not only wear-resistant, non-slip, does not deform. painted or coated chassis parts are protected.
BulletPoint5 : 【Upgrade Storage Bag】Storage bag keeps jack lift pads organized. Easy to store in your trunk or garage.
Color : Black,Red
CompatibilityOptions : Universal
CompatibleWithVehicleType : Car
CompatibleWithVehicleType1 : ATV
CompatibleWithVehicleType2 : UTV
ConnectorType : Screw
CurrentRating : 250 amps
ExternallyAssignedProductIdentifier1 : 782500217149
ExternallyAssignedProductIdentifier2 : 0782500217149
ExternallyAssignedProductIdentifier3 : 0190949964393
ExternallyAssignedProductIdentifier4 : 0657835117702
FinishType : Powder Coated
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : snatch block
ItemDisplayDimensions_Height : 22 inches
ItemDisplayDimensions_Length : 22 inches
ItemDisplayDimensions_Width : 22 inches
ItemName : BANGTING Lifting Jack Pad Set Compatible with Tesla Model 3/S/X/Y, 4 Pucks with a Storage Case, Accessories for Tesla Vehicles
ItemPackageDimensions_Height : 21 centimeters
ItemPackageDimensions_Length : 5.8 centimeters
ItemPackageDimensions_Width : 19.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : jack-accessories
LoadCapacity : 2.1E+3 kilograms
Manufacturer : BANGTING
Material : Rubber
MinimumSwitchingVoltage : 12 volts_of_direct_current
ModelName : 4T orange
ModelNumber : 4T orange
MountingType : Surface Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 2
NumberOfTerminals : 3
OperationMode : Manual
PackageLevel : unit
PartNumber : BANGTING-oo1
ProductDescription :

Specially developed for Tesla Model 3/S/X/Y. Each adapter fits perfectly in factory lifting stations. Suitable for all Tesla.

Feature：

• 3. Storage bags keep the lifting cushions tidy. Easy to store in your trunk or garage.

Installation:

• 1. Make sure that the slide for the adapter socket and the vehicle socket directly below it are positioned in the middle of the adapter to the grip pad.
• 2. Insert the adapter pad into the point hole of the vehicle jack and position the jack directly underneath. Just make sure the jack is centered on the adapter pad.

This package includes:

• 4 * rubber pad of the plug-in socket
• 1 * storage box

suggestion:

• 1, because it is a rubber material, so there is a little rubber smell, please post in ventilated room for a while.
• 2. If your car has a small side guide, please be careful when buying grooved rubber pads.
• 3, dimensions measured manually, measurement errors allowed 1-3mm.

ProductSiteLaunchDate : 2023-03-14T01:17:50.501Z
Size : 1/2" X 22 Inch
SpecificationMet : IP67
StreetDate : 2025-04-11T00:00:01Z
Style : Floor Jack
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TensileStrength : 57000 pounds
UnitCount : 1
UnspscCode : 24101600
WarrantyDescription : 1 year
Wattage : 3000 watts