Cart 2 india

Specification
BottleType : Water Bottle
Brand : VaVoger
BulletPoint1 : Update co2 soda refill adapter: Refill co2 only fit for Soda Terra Duo or Art soda maker CO2 cylinder which is pink color. Our adapter don't work RPV valve (residual pressure valve),but some of RPV valve can be removed by hex wrench,please check before ordering.
BulletPoint2 : Function-This soda maker refill adapter can be used to refill small CO2 tanks from larger CGA320 thread CO2 tank (5lb or 20lb), with 2 turn on/off valves and pressure gauge, easy to use.
BulletPoint3 : Support High Pressure- The refill adapter is US standard, support 6000 psi high pressure with spring protector,and the surface is polished plating, very strong and beautiful.
BulletPoint4 : Safety Enough-This soda cylinder refill adapter have double valve for safe,with a pressure gauge to ensure the pressure will not exceed the pressure specification of the small soda co2 tank.
BulletPoint5 : Save Cost on Refill- This system allows you to fill soda co2 bottle from a larger co2 tank which has a CGA320 outlet valve.
Capacity : 1183 milliliters
CareInstructions : Dishwasher Safe
Color : pink
ExteriorFinish : Rubber
ExternallyAssignedProductIdentifier1 : 0752859110255
ExternallyAssignedProductIdentifier2 : 752859110255
GpsrSafetyAttestation : 1
ItemName : Soda CO2 Refill Adapter Soda Maker Co2 Cylinder Refill Station for Filling Soda Pink Co2 Bottle,Compatible with DUO Terra Art Soda Co2 Canister
ItemPackageDimensions_Height : 21.59 centimeters
ItemPackageDimensions_Length : 6.8072 centimeters
ItemPackageDimensions_Width : 10.3124 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-lavatory-baby-changing-stations
Manufacturer : UP100
Material : Aluminum, Stainless Steel, Brass, Polypropylene
Material1 : Polypropylene
Material2 : Silicone
NumberOfPieces : 10
OperationMode : Manual
PartNumber : 07010280L10
Pattern : Solid
PowerSourceType : Manual
ProductDescription : How to use it:
1. Put the gasket into the connector, confirm whether the intake valve and release valve are closed, and turn the pin switch of the small cylinder adapter to the top.
2. Connect the large carbon dioxide tank.
3. Connect the small soda machine co2 cylinder.
4. Turn the pin switch of the adapter to the bottom to fully open the cylinder valve.
5. Open the intake valve (the first valve from the large water tank, not the large water tank handwheel).
6. Easily open your big tank handwheel and listen to a little one. When you pinch it, open it a bit until it keeps open. Wait about 30-60 seconds until you hear no gas flow and filling can be completed.
7. After filling, turn the handwheel to stop the carbon dioxide.
8. Turn the pin switch to the top to isolate the soda cylinder.
9. Open the escape valve to release residual gas.
10. Remove the small cylinder.

Please pay attention: If the vial thimble is very thick and short and cannot be inflated, Hose will expand, please replace the thin thimble bottle.The atmospheric cylinder should have sufficient pressure, If there is no siphon or liquid CO2 in the atmosphere bottle, Need to invert the CO2 atmospheric tank for inflation
ProductSiteLaunchDate : 2022-12-01T08:55:45.725Z
Style : Tank to pink cylinder with ball valve
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 52141500
WasherType : Flat