Cart 2 india

Specification
AutoPartPosition : left
Brand : Mishimoto
BulletPoint1 : Direct-fit for the 2013+ Ford Focus ST
BulletPoint2 : Increase in Oil Capacity: 0.65 quarts / Temperature Difference: 30+F / Pressure Drop: 3-5 psi
BulletPoint3 : Oil cooler location does not interfere with aftermarket air intakes
BulletPoint4 : 19-row stacked-plate oil cooler for optimal fluid temperature reduction
BulletPoint5 : Mishimoto Lifetime Warranty
BulletPoint6 : Maximum 30 amp continuous draw with 30A in-line fuse protection.
BulletPoint7 : A/C override or manual toggle switch wire built directly into harness.
BulletPoint8 : Preset to ground fan at 180'F turn-on and 165'F turn-off temperature.
BulletPoint9 : Single pin 1/8" inch NPT brass thread-in probe grounding switch.
Color : Silver, Thermostatic
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier : 5707286363403
ExternallyAssignedProductIdentifier1 : 748354021639
ExternallyAssignedProductIdentifier2 : 3108687470745
ExternallyAssignedProductIdentifier3 : 0748354021639
ExternallyAssignedProductIdentifier4 : 00748354021639
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : Oil Cooler Kit
ItemDisplayWeight : 2.472727273 kilograms
ItemName : Mishimoto MMOC-FOST-13T Oil Cooler Kit Low-Temp Thermostatic Compatible With Ford Focus ST 2013+ Silver
ItemPackageDimensions_Height : 46.99 centimeters
ItemPackageDimensions_Length : 21.59 centimeters
ItemPackageDimensions_Width : 38.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-engine-oil-coolers
Manufacturer : Mishimoto
Material : aluminum
ModelName : MMOC-FOST-13T
ModelNumber : MMOC-FOST-13T
NumberOfBoxes : 1
NumberOfItems : 1
OeManufacturer : Ford
OemEquivalentPartNumber : MMOC-FOST-13T
OemEquivalentPartNumber1 : 17 12 7 507 983
OemEquivalentPartNumber2 : 17 127 507 983
OemEquivalentPartNumber3 : 17127507983
OemEquivalentPartNumber4 : 7507983
PackageLevel : unit
PartNumber : MMOC-FOST-13T
PartTypeId : 2084
ProductDescription : After a few laps on the track or some aggressive street driving, turbocharged 4 cylinder engines like the 2.0L EcoBoost in the Focus ST are known to overheat oil quickly. Even with the stock liquid to liquid heat exchanger, the EcoBoost can still run hot and risk overheating the engine's coolant. Aggressive tunes paired with some track miles can significantly overheat your oil and wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution for your Focus ST! The Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was mounted on the passenger side as to not interfere with some aftermarket air intake systems. Application specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 30�F (16.7�C) using our non-thermostatic sandwich plate. This proved that our oil cooler kit can withstand the stress of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.
ProductSiteLaunchDate : 2015-08-18T12:11:32.235Z
Size : 1-1/2 Inch
StreetDate : 2016-02-23T00:00:01Z
Style : CL150-2PK
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000
WarrantyDescription : Lifetime Warranty