Cart 2 india

Specification
Brand : AB Tools
BulletPoint : Awning Pull Strap; For Window Awning; Adjustable With Buckle; 28-33 Inch Length; Single; With Retail Packaging
BulletPoint1 : Includes 30 x 20mm eyelets
BulletPoint2 : outside diameter 20mm
BulletPoint3 : internal diameter 12mm
BulletPoint4 : Colour: Gold
BulletPoint5 : Very simple to use, simply punch a hole
Color : Multicolored
ExternallyAssignedProductIdentifier : 5056133346305
ExternallyAssignedProductIdentifier1 : 0700360038414
ExternallyAssignedProductIdentifier2 : 700360038414
ExternallyAssignedProductIdentifier3 : 00711217017087
ExternallyAssignedProductIdentifier4 : 0757901506567
FabricType : Polyester
FabricType1 : polyester
FabricType2 : vinyl
GpsrSafetyAttestation : 1
IsAssemblyRequired : 1
ItemName : AB Tools Tarpaulin Repair Kit/Eyelet Kit TE061
ItemPackageDimensions_Height : 88.4 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 16.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : rv-awning-and-screen-accessories
Manufacturer : AB Tools
Material : Polyester
Material1 : Polyester
Material2 : Vinyl
ModelName : 80158B00
ModelNumber : ETCT0015.0002
NumberOfItems : 1
OperationMode1 : found in image
OperationMode2 : Manual
PackageLevel : unit
PartNumber : TE061
Pattern : Solid
ProductDescription : Complete repair kit with everything you need to put eyelets into a tarpaulin or sheet.

Very simple to use, simply punch a hole with the supplied punch. Then rivet the eyelet in with the tool and anvil.

Includes 30 x 20mm eyelets (30 eyelets and 30 washers), outside diameter 20mm, internal diameter 12mm.

SIMPLE TO USE

STEP 1 Use the hole cutter to cut a hole for the new eyelet. Place the cutter in the desired position and strike hard with a hammer to pierce a hole in the tarpaulin (this is to be done on a hard surface)
STEP 2 Put the bottom half of the eyelet in the eyelet holder. The lower half is the larger part of the eyelet with the raised centre which pass through the underneath of the hole in the tarpaulin.
STEP 3 Place the upper ring of eyelet over the lower part of the eyelet which is protruding through the tarpaulin. The upper ring has a recessed ridge around the inside this must be facing up.
STEP 4 Position the eyelet punch tool over the top of the new eyelet and into the hole in the centre through to the eyelet holder underneath. Again with the eyelet on a hard surface strike the hammer to fix the eyelet into place.


ProductSiteLaunchDate : 2022-03-20T08:57:14.326Z
ShipsGlobally : 1
Size : Siehe Produktbeschreibung
StreetDate : 2015-09-19T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 46182300
WaterResistanceLevel : waterproof