Cart 2 india

Specification
AudioOutputMode : Stereo
Brand : getwiredusa
BulletPoint1 : Video Amplifier - A great Full Band Digital Video Amplifier for multiple locations.
BulletPoint2 : Full Band Video Amplifier for boosting signal for 1-4 locations
BulletPoint3 : Input signal UHF, VHF, FM & DAB Frequency 47MHz - 860MHz.
BulletPoint4 : Audio Inputs Coaxial RF/F-type
BulletPoint5 : RACK DESIGN: Standard 2U rack-mountable chassis with efficient cooling system for reliable performance in professional installations
Color : black
CompatibleDevices : Television
ConnectivityTechnology : USB
ConnectorType : USB Type A
ControllerType : Push Button
ExternallyAssignedProductIdentifier : 7452092402607
ExternallyAssignedProductIdentifier1 : 0601959609766
ExternallyAssignedProductIdentifier2 : 601959609766
IncludedComponents : Mounting Bracket
IncludedComponents1 : Amplifier
IncludedComponents2 : Power Cable
IncludedComponents3 : Terminal Block Connectors
IncludedComponents4 : User Manual
ItemName : 3dB 4X Out - Distribution Amplifier UHF/VHF/FM - Signal Booster (4 Way Splitter)
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 8 inches
ItemPackageDimensions_Width : 5 inches
ItemTypeKeyword : audio-and-video-component-receivers-and-amplifiers
Manufacturer : Getwiredusa
Material : Metal
Material1 : Metal
Material2 : Plastic
MaximumSupplyVoltage : 125 volts
MinimumSupplyVoltage : 110 volts
ModelName : Video Amplifier
ModelNumber : US56-FX194
NumberOfItems : 1
OperatingTemperature : 32
OutputPower : 1 watts
PartNumber : Cxq4k4
ProductDescription : If you need to Add a couple of HD Ready TV sets to your TV Antenna Hook-up, choose one of these distribution amps in order to Offset the Loss encountered when adding a Splitter To feed the additional Outlets. This Amplifiers will Pass HDTV, DTV and Analog Signals. Those that have a Specific Band-Pass of up to at least 890 MHz are good for VHF/UHF and FM also... Making Them Suitable for Home use of Off-Air Antenna Television Carriage. NOT suitable for Satellite, or broad band cable internet. All these Amps are forward only (54-890 MHz, 50-900 MHz), matching the Bandwidth of any TV Antenna System, but will not pass return from High Speed Internet Modems or Pay Per View Converter Boxes associated with Cable TV signals. Amplifiers- Should be utilized for these two reasons: 1.) To increase already adequate signal as to pre-emphasize the level to balance out losses after the amplifier such as splitters and cable in the distribution system on its way to various TVs in the house, and 2.) To maintain Signal level to noise at the origin (your antenna) so that low signal levels from far away stations are not lost in a longer than average cable run to the location in the house where the signals would be further distributed to the TVs desired. Selecting an Amplifier with the Proper dB Gain. The gain of a Line Amplifier should be selected to zero out the loss that follows it. In other words, if you have fifty feet of cable and a two-way splitter, then a 10 db amplifier will be fine. Conversely, if you have an eight-way splitter and hundreds of feet of cable, you will need an amplifier with a higher gain. Just as in the case of a Pre-Amplifier, however, bigger is not always better.
ProductSiteLaunchDate : 2025-06-26T23:33:28.431Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
Voltage : 127 volts_of_alternating_current
Wattage : 1 watts