Cart 2 india

Specification
Brand : FENVY
BulletPoint1 : The current clamp is a transducer, which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms accurately.
BulletPoint2 : When measuring the AC/DC Current with the Current Clamp, a multimeter or scope can directly measure the current up to 65 A , with a frequency up to 20KHz;
BulletPoint3 : In this method, there is no need to break a circuit or to affect the isolation to measure the current;
BulletPoint4 : The Current Clamp is not only available for the detection or monitor of the possibly existing creepage, but for the measurement with little gap using its extended jaws;
BulletPoint5 : However, it is necessary to turn the zero adjustment knobs on the clamp until the multimeter or scope reads zero.
Color : Cc-650
ExternallyAssignedProductIdentifier : 7435467182076
Hazmat1 : LITHIUM ION BATTERIES PACKED WITH EQUIPMENT
Hazmat10 : CA_SmallLithiumIonBatteryWithEquipment
Hazmat11 : CN_SmallLithiumIonBatteryWithEquipment
Hazmat12 : IT_SmallLithiumIonBatteryWithEquipment
Hazmat13 : ES_SmallLithiumIonBatteryWithEquipment
Hazmat14 : IN_SmallLithiumIonBatteryWithEquipment
Hazmat15 : MX_SmallLithiumIonBatteryWithEquipment
Hazmat16 : SG_SmallLithiumIonBatteryWithEquipment
Hazmat17 : AU_SmallLithiumIonBatteryWithEquipment
Hazmat18 : BR_SmallLithiumIonBatteryWithEquipment
Hazmat19 : TR_SmallLithiumIonBatteryWithEquipment
Hazmat2 : UN3481
Hazmat20 : AE_SmallLithiumIonBatteryWithEquipment
Hazmat21 : SA_SmallLithiumIonBatteryWithEquipment
Hazmat22 : EG_SmallLithiumIonBatteryWithEquipment
Hazmat23 : NL_SmallLithiumIonBatteryWithEquipment
Hazmat24 : SE_SmallLithiumIonBatteryWithEquipment
Hazmat25 : PL_SmallLithiumIonBatteryWithEquipment
Hazmat26 : BE_SmallLithiumIonBatteryWithEquipment
Hazmat27 : ZA_SmallLithiumIonBatteryWithEquipment
Hazmat28 : IE_SmallLithiumIonBatteryWithEquipment
Hazmat3 : II
Hazmat4 : 9
Hazmat5 : US_SmallLithiumIonBatteryWithEquipment
Hazmat6 : GB_SmallLithiumIonBatteryWithEquipment
Hazmat7 : DE_SmallLithiumIonBatteryWithEquipment
Hazmat8 : FR_SmallLithiumIonBatteryWithEquipment
Hazmat9 : JP_SmallLithiumIonBatteryWithEquipment
ItemName : FENVY Portable Oscilloscope Oscilloscope CC65 CC650 AC/DC Current Clamp Meter Multimeter Probe 20KHz 400Hz Bandwidth 1mv/10ma 65A/650A with High Performance (Color : CC-650, Size : 1), 235247850
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 22 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-oscilloscopes
Manufacturer : FENVY
ModelName : 235247850
ModelNumber : 235247850
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 235247850
ProductDescription : Description:HOW TO USE:When connected with any multi-meter or a scope,connect the BNC connector of the clamp to a scope connector;Set the power switch form "Off" to "ON" position, that is to set the multimeter range to 1mV/10mA or 1mV/100mA. Then, the green LED will be lighting, indicating that the clamp is switched on;when the current is not greater than 2 ampere ,please set the current clamp range to 1mV/10mA and set the multi-meter range to 200mV AC or 200 mV DC, which depends on the type of the current;Before measuring the DC current, it is needed to turn the zero adjustment knobs on the clamp until the multimeter reads zero. That means pushing down the zero adjustment knobs on the clamp until the multimeter reads zero. Then let go hold of the zero adjustment knobs.When using a scope,set DC coupled mode to measure DC current;Clamp the jaws around the current-carrying conductor and operate as above;When the current clamp range is set to 1mV/10mA, the actual current is ten times of the measured current whose unit is mA. For example, the measured current is 10 mV and The actual current of the current-carrying conductor is 10×10=100mA;In the case of DC current, the output is positive when the current flows from the upside to the underside of the clamp;In the case of DC current measurement, the current clamp can not possibly zero properly, due to the hysteresis effect. To eliminate this, open and close the jaws several times and then zero again.
ProductSiteLaunchDate : 2024-01-16T02:52:49.571Z
Size : 1
UnitCount : 1
UnspscCode : 27000000