Specification Brand : Garosa BulletPoint1 : Faster Sampling Speed: This handheld oscilloscope has a real time sampling rate of 5.0MS/s and a bandwidth of 1M. The 10X probe can measure up to 800VPP, equivalent to 280V AC, and can measure voltage of ±400V. BulletPoint2 : Professional Design: With full function (AUTO, Normal, Single). Suitable for periodic analog and non periodic digital . 2.8 inch HD LCD display with 320x240 resolution. The Type C interface supports data transfer and charging. BulletPoint3 : Convenient to Use: This portable oscilloscope is already assembled and can be applied directly to avoid problems during the assembly and welding process. Suitable for the maintenance industry, research and development education industry. BulletPoint4 : Easy to Measure: Equipped with efficient one key AUTO setting for all parameters, supporting waveform display without the need for tedious adjustments. Long press the AUTO button to quickly calibrate the baseline, measure waveforms quickly, and improve work efficiency. BulletPoint5 : Longer Endurance: The car oscilloscope has a built in rechargeable lithium battery, a large capacity of 1000mAh, and can be applied continuously for about 4 hours when fully charged. 5V 1AUSB charging, convenient for use anytime, anywhere. ItemName : 2 in 1 Digital Oscilloscope Generator Lab Oscilloscopes 5.0MS Sampling Rate 1M Bandwidth 2.8 Inch Display Portable Oscilloscope with 10X Probe ItemPackageDimensions_Height : 5 centimeters ItemPackageDimensions_Length : 21 centimeters ItemPackageDimensions_Width : 15 centimeters ItemTypeKeyword : science-lab-oscilloscopes Manufacturer : Garosa ModelNumber : Garosah14a7btrex NumberOfItems : 1 PartNumber : Garosah14a7btrex ProductDescription : Spec: Item Type: Handheld Oscilloscope Model: DSO153 Sampling Rate: 5MS/s Bandwidth: 1M Vertical Sensitivity: 10mV/Div-10V/Div Time Base Range: 500ns-20S Probe Voltage Range: ±400V (Vpp:800V) Mode: Auto, Normal, Single : Rising , Falling Coupling Mode: AC DC Frequency: 1K; Duty Cycle: 50%; Amplitude: 3.3V Generator: Frequency: 0-10KHz Duty Cycle: 0-100( and Sawtooth ) Amplitude: 0.1-3.3V Waveform: Sine , , Sawtooth Half , Full , Positive Step , Inverse Step , Noise , Exponential Rise, Exponential Fall, DC , Sink Pulse, Lorentz Display: 2.8 inch, PPI: 320x240 USB Charging: 5V 1A Battery Type: 1 x 1000mAh Rechargeable Lithium Battery (Built in)
How to Use: Power on to use
PackageList: 1 x Oscilloscope 2 x User Manuals 1 x Lanyard 1 x Clip Cable 1 x USB Cable 1 x Probe Cable 12 x Accessories