Cart 2 india

Specification
Brand : Generic
BulletPoint : 3.5mm 4.3mm 4.5mm 2.3mm Oscilloscope Probe Ground Spring Ground Pin
BulletPoint1 : BANDWIDTH INFORMANCE: Universal oscilloscope probe 10:1 and 1:1 switchable bandwidth is 50MHz, usable with scopes having bandwidth up to 500MHz
BulletPoint2 : INTERCHANGEABLE TIP: Adopt interchangeable probe tip, possess high sensitivity, excellent performance and function, you can use with confidence
BulletPoint3 : INTERFERENCE : Oscilloscope probe come with fully shielded welded BNC connector, possess small interference; Copper plated gold pin for good test versatility and capability
BulletPoint4 : TECHNICAL PARAMETERS: Oscilloscope probe kit input impedance is 1MΩ:10MΩ, possess Low power consumption and energy saving, provide great convenience for your work
BulletPoint5 : STRONG MATERIAL：Passive oscilloscope probe has high impedance, adopt excellent ABS material, possess impact , scratch ,
Color : Gray &Amp; Black
ExternallyAssignedProductIdentifier1 : 0810168140285
ExternallyAssignedProductIdentifier2 : 810168140285
IncludedComponents : No
ItemName : Oscilloscope Probe 500mhz Passive High Impedance Universal Kit Interchangeable High Sensitivity with BNC Connector
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 20 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : oscilloscope-probes
Manufacturer : Generic
Material : Plastic
MeasurementAccuracy : 0.1mm
ModelName : Srliyanaesf0hiut
ModelNumber : Genericaph5ws3u6g
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Genericaph5ws3u6g
ProductDescription : Specification:
Item Type: Oscilloscope Probe
Material: ABS
Attenuation: 1:10
Input Impedance: 1MΩ:10MΩ
Frequency: 500MHz or 10MHz
Input Capacitance: 1X: 45pF-65pF, 10X: 8.5pF-18.5pF
Compensation Range: 5pF-30pF
System Bandwidth: 1X: DC-10MHz, 10X: DC-500MHz
Maximum Working Voltage Input: 1X:

How to Use:
Before any measurements are taken using a probe, its compensation should first be checked and adjusted to match that of the channel input. Most oscilloscopes have a square reference available on the front panel specifically for the purpose of probe compensation. Connect the probe to the source to display a 1 KHz test on the oscilloscope. Set the probe to the 10X position.

packing list:
1 x Oscilloscope Probe
4 x Identification Ring
2 x Insulation Cap
1 x Spring Needle
ProductSiteLaunchDate : 2025-01-08T23:07:41.286Z
Size : One Size
Style : lab-oscilloscopes/Probe
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41113638