Cart 2 india

Specification
Brand : Micsig
BulletPoint : Oscilloscope Probes
BulletPoint1 : Excellent Bandwidth Flatness The MDP series probe has excellent bandwidth flatness, amplitude fluctuation less than 0.5dB within its half bandwidth range, even in high frequency bands can also maintain high accuracy.
BulletPoint2 : High Accuracy, High CMRR High input impedance and low input capacitance, minimized load effect, greatly improved the accuracy of the differential signal. High common mode rejection capability, able to meet floating measurements of large common mode voltage at high frequencies. CH1: @ 100KHz, 207.7V, output common mode signal amplitude 94.62mV, CMRR > -60dB
BulletPoint3 : Low Noise, MDP3000 test results: under 1000X, noise at full bandwidth is 254.8μVrms.
BulletPoint4 : 5MHz Bandwidth Limit (only available on 100MHz ~ 200MHz versions，except DP7000)When measuring FET switching frequency in most switching power supplies, MDP probe effectively eliminates high-frequency noise.
BulletPoint5 : Quick Zero Short-circuit the test leads, press Zero button, the probe can be zeroed very fast. Dual Range Selection Improves signal-to-noise ratio, meet more test requirements. BNC Interface Standard BNC interface, work with any oscilloscope.
Color : Black
ExternallyAssignedProductIdentifier : 4570194100160
ExternallyAssignedProductIdentifier1 : 9495568284695
ExternallyAssignedProductIdentifier2 : 9495568285210
Hazmat1 : un1993
IncludedComponents : Micsig-MDP3001
ItemName : Micsig Oscilloscope Probe MDP Series MDP700/701/702 MDP1500/1501/1502 MDP3000/3001/3002 100/200/300Mhz High Voltage Differential Probe BNC Interface(MDP3001)
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 28 centimeters
ItemPackageDimensions_Width : 24 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : oscilloscope-probes
Manufacturer : Micsig
Material : acrylonitrile_butadiene_styrene
MeasurementAccuracy : +/-0.5%
ModelNumber : Micsig-MDP701
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Micsig-MDP3001
ProductDescription :

MICSIG High Voltage Differential Probe 100MHz(MDP700/1500/3000) / 150MHz(MDP701/1501/3001) / 200MHz(MDP702/1502/3002)
◼ KEY FEATURES
◼ Bandwidth:100MHz(MDP700/1500/3000) / 150MHz(MDP701/1501/3001) / 200MHz(MDP702/1502/3002)
◼ Max. Voltage:700Vpk / 1500Vpk / 3000Vpk
◼ 5MHz Bandwidth Limit
◼ When measuring FET switching frequency in most switching power supplies, MDP probe effectively eliminates high-frequency noise.
Quick Zero
◼ Short-circuit the test leads, press Zero button, the probe can be zeroed very fast.
Dual Range Selection
◼ Improves signal-to-noise ratio, meet more test requirements.
BNC Interface
◼ Standard BNC interface, work with any oscilloscope.
USB Power Supply
Powered directly by oscilloscope's USB port via type-C cable.
Overvoltage Alarm
◼ LED flashes, buzzer "beeps" rapidly, indicating an over-range alert.
Compact & Exquisite
◼ Much smaller than traditional differential probes.
Excellent Bandwidth Flatness
The MDP series probe has excellent bandwidth flatness, amplitude fluctuation less than 0.5dB within its half bandwidth range, even in high frequency bands can also maintain high accuracy.
High Accuracy, High CMRR
High input impedance and low input capacitance, minimized load effect, greatly improved the accuracy of the differential signal. High common mode rejection capability, able to meet floating measurements of large common mode voltage at high frequencies.
CH1: @ 100KHz, 207.7V, output common mode signal amplitude 94.62mV, CMRR > -60dB Low Noise
Short circuit the input ends, connect to CH1. Set both attenuation ratio at 50X, vertical scale at 250mV/div, time base at 1ms, input impedance is 1MΩ, observe the noise floor:
* Noise: 40.62mV (RMS) at full bandwidth

ProductSiteLaunchDate : 2024-04-26T00:58:21.242Z
Size : MDP3001
Style : Tablet Oscilloscope
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Wattage : 10 watts