Specification Brand : GOTOTOP BulletPoint1 : Banana Plug The probe has a banana plug for use in combination with the oscilloscope,Automotive Probe BulletPoint2 : They can also work as pin-tip probes for small circuit boards.,Automotive Repair Probe BulletPoint3 : BANANA PLUG: The Wire piercing probe has a banana plug for use in combination with the oscilloscope, ideal choice for automotive electrical measuring and repairing,Automotive Oscilloscope Probe BulletPoint4 : Good Effects It Is Recoverable. If The Pin Gets Damaged Or Useless, Just Pull Out The Old Pin And Install The New One.,Automotive Test Probe BulletPoint5 : Suitable For The Probe Has A Banana Plug For Use In Combination With The Oscilloscope,Automotive Diagnosis Probe IncludedComponents : No ItemName : Automotive Oscilloscope Acupuncture Automotive Oscilloscope Probe Automotive Test Probe Oscilloscope Probes ItemPackageDimensions_Height : 2 centimeters ItemPackageDimensions_Length : 9 centimeters ItemPackageDimensions_Width : 8 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : oscilloscope-probes Manufacturer : GOTOTOP Material : Material MeasurementAccuracy : 0.1mm ModelName : GOTOTOPtqrx9cyg71 ModelNumber : GOTOTOPtqrx9cyg71 NumberOfItems : 1 PartNumber : GOTOTOPtqrx9cyg71 PowerSourceType : Powersource ProductDescription : 1. pin with small diameter makes it ideal for piercing the insulation of small gauge wires. 2. It is recoverable. if the pin gets damaged or useless, just pull out the old pin and install the new one. 3. The probe has a banana plug for use in combination with the oscilloscope. 4. Comes with 20 replacement pins, convenient to replace the damaged or useless one. 5. They can also work as pin-tip probes for small circuit boards.
Specification: This probe set is used to pierce the insulation layer of wires for automotive electrical measurements, which does not damage the wires. And it has a banana plug for use in combination with the oscilloscope. An ideal too set for automotive diagnosis, test and repair.
Features: 1. pin with small diameter makes it ideal for piercing the insulation of small gauge wires. 2. It is recoverable. if the pin gets damaged or useless, just pull out the old pin and install the new one. 3. The probe has a banana plug for use in combination with the oscilloscope. 4. Comes with 20 replacement pins, convenient to replace the damaged or useless one. 5. They can also work as pin-tip probes for small circuit boards.
Specification: Condition: brand new Probe Casing Color: Red, Black, Yellow, Green, Blue Probe Total Length: 65mm/2.56in Pin Length: 28mm/1.10in Weight: Approx. 35g/1.2oz
Note: 1. Due to the difference between monitors and light effect, the pictures may not reflect the actual color of the item. 2. Please allow slight error due to manual measurement. Thanks for your understanding.