Specification Brand : Hyuduo BulletPoint1 : PREMIUM MATERIAL:Passive oscilloscope probe has high impedance, adopt excellent ABS material, possess impact , scratch , BulletPoint2 : BANDWIDTH INFORMANCE: Universal oscilloscope probe 10:1 and 1:1 switchable bandwidth is 50MHz, usable with scopes having bandwidth up to 500MHz BulletPoint3 : TECHNICAL PARAMETERS: Oscilloscope probe kit input impedance is 1MΩ:10MΩ, possess Low power consumption and energy saving, provide great convenience for your work BulletPoint4 : HIGH SENSITIVITY: Adopt interchangeable probe tip, possess high sensitivity, excellent performance and function, you can use with confidence BulletPoint5 : INTERFERENCE : Oscilloscope probe come with fully shielded welded BNC connector, possess small interference; Copper plated gold pin for good test versatility and capability Color : FX-Clear CompatibleDevices : Fluke 1535/1537 CompatiblePhoneModels : Fluke 1535/1537 ExternallyAssignedProductIdentifier : 4053664381745 FinishType : Glänzend GpsrSafetyAttestation : 1 IncludedComponents : No ItemHardness : 6H ItemName : Oscilloscope Probe 500mhz, 500mhz Oscilloscope Probe High Sensitivity BNC Connector Passive Oscilloscope Probe Kit, Oscilloscopes ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 20 centimeters ItemPackageDimensions_Width : 13 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : oscilloscope-accessories Manufacturer : Hyuduo Material : Polyethylenterephthalat MeasurementAccuracy : 0.1mm ModelName : Genericw5r49pk108 ModelNumber : Hyuduo6krg2d5sh4 NumberOfItems : 1 PartNumber : Hyuduo6krg2d5sh4 ProductDescription : Spec: Item Type: Oscilloscope Probe Material: ABS Attenuation: 1:10 Input Impedance: 1MΩ:10MΩ Frequency: 500MHz or 10MHz Input Capacitance: 1X: 45pF-65pF, 10X: 8.5pF-18.5pF Compensation Range: 5pF-30pF System Bandwidth: 1X: DC-10MHz, 10X: DC-500MHz Maximum Working Voltage Input: 1X:
How to Use: Before any measurements are taken using a probe, its compensation should first be checked and adjusted to match that of the channel input. Most oscilloscopes have a reference available on the front panel specifically for the purpose of probe compensation. Connect the probe to the source to display a 1 KHz test on the oscilloscope. Set the probe to the 10X position.
Package List: 1 x Oscilloscope Probe 4 x Identification 2 x Insulation 1 x Spring Needle