Specification Brand : VERIMP BulletPoint1 : This instrument is a single-stage centrifugal pump model, applying the principle of centrifugal force to illustrate the structure and working principle of the centrifugal pump. BulletPoint2 : The instrument mainly has the following components: in the pump chamber composed of the casing and the transparent cover plate, the rotating shaft and the impeller fixed on the shaft are arranged; in the tangential direction of the outer edge of the casing step, there is a drain pipe; in the axial direction of the rotating shaft There is a suction pipe; the venting screw is plugged in the upper part of the casing: the rotating wheel of the size is connected by a gear. BulletPoint3 : The entire instrument is attached to the base. BulletPoint4 : Made of transparent and stainless steel parts, it is composed of a water tank, a small piston cylinder, a large piston cylinder, a pressure platform, a cutter, etc. BulletPoint5 : The diameter of the small piston is 16mm, and the movement distance is 80mm; the diameter of the large piston is 56mm, and the movement distance is greater than 50mm; the volume of the water tank is 500ml. The total size is about 200*130*300mm. Color : One Color ExternallyAssignedProductIdentifier : 8255401062498 ItemName : VERIMP Centrifugal Water Pump Model Gear Teaching Demonstration Gear Type Centrifugal Pump Model Science Teaching Aid Physics Teaching Demonstration Experimental Teaching Equipment ItemPackageDimensions_Height : 1 centimeters ItemPackageDimensions_Length : 3 centimeters ItemPackageDimensions_Width : 2 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : science-classroom-optics-kits Manufacturer : VERIMP ModelNumber : VERIMP NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : VERIMP ProductDescription : [name]: centrifugal pump model[weight]: 1.7kg (including the base)[Specification]: 280 × 130 × 205mm[Description]: This instrument is a single-stage centrifugal pump model, applying the principle of centrifugal force to explain the structure and working principle of the centrifugal pump. The instrument mainly has the following components: in the pump chamber composed of the casing and the transparent cover plate, the rotating shaft and the impeller fixed on the shaft are arranged; in the tangential direction of the outer edge of the casing step, there is a drain pipe; in the axial direction of the rotating shaft There is a suction pipe; the venting screw is plugged on the upper part of the casing: the rotating wheel of the size is connected by a gear, and the whole instrument is fixed on the base.Pump shaft speed: 900 rpmImpeller diameter: 100 mmHead: 1 meterDimensions: 280X130×205 mm ProductSiteLaunchDate : 2024-07-04T10:55:15.000Z Size : One Size UnitCount : 1