Cart 2 india

Specification
AgeRangeDescription : Adult
Brand : VERIMP
BulletPoint1 : Purpose: For ultrasonic ranging, alarm, water level control, reversing alarm and other controls
BulletPoint2 : This instrument uses a dedicated microcontroller control circuit to conduct demonstration experiments through ultrasonic transmission and reception and related control circuits.
BulletPoint3 : During various experiments, the distance is measured using the transmission and reception of ultrasonic waves, and processed according to different set states.
BulletPoint4 : This instrument should be placed in a dry, ventilated, and non-corrosive indoor environment.
BulletPoint5 : The demonstrator uses two inductors, a small 3.8V light bulb and a high-brightness light-emitting diode to display changes in self-induction phenomena. It has the characteristics of good reliability, intuitive and obvious experimental results, and easy operation.
Color : One Color
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier : 8255401073333
ItemName : Ultrasonic Application Demonstrator Ultrasonic Ranging Instrument an Instrument for Conducting Ultrasonic Ranging Alarm Water Level Control Reversing Alarm and Other Control
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-classroom-optics-kits
Manufacturer : VERIMP
ModelName : VERIMP
ModelNumber : VERIMP
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : VERIMP
ProductDescription : Dimensions: length 200*width 175*thickness 70mm
Material: plastic shell, metal components
Weight: Net weight about 500g
Purpose: For ultrasonic ranging, alarm, water level control, reversing alarm and other controls
Experimental instruments.
This instrument uses a dedicated microcontroller control circuit to conduct demonstration experiments through ultrasonic transmission and reception and related control circuits. During various experiments, the distance is measured using the transmission and reception of ultrasonic waves, and processed according to different set states.
The main parameters
Power supply voltage: 220V/50HZ
Working frequency: 40KHz
Display distance: 0.2~2.5m
<;3w
Overall dimensions: 210mm×200mm×75mm
1. Since the generation of ultrasonic waves has a certain diffusion angle, in order to perform the experiment normally, the bottom bracket of the instrument should be raised or the instrument should be placed on the edge of the experimental table. The obstruction should be placed on the vertical plane at the front of the instrument. If the angle exceeds a certain angle, the instrument will not be able to receive signals normally.
2. This instrument should be operated in a dry, ventilated, and non-corrosive indoor environment. If it is not used for a long time, it should be powered on every 2 to 3 months to ensure that the instrument is working in a normal state.
3. After use, the power supply should be cut off in time.
ProductSiteLaunchDate : 2024-07-12T10:59:57.213Z
Size : One Size
UnitCount : 1