KEYENCE FS-T1 Fiber Optic Sensor Amplifier New
Specifications:
Model: FS-T1
Type: Main unit
Output: NPN
Light source: Red LED
Sensitivity adjustment/Mode selection: Button
Response time: 250 μs
Operation mode: LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp: Output indicator: Red LED, Stable operation indicator: Green LED Calibration indicator: Orange LED
Timer function: ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
Input: Non-voltage input (contact, solid state)
Control output: NPN open-collector 100 mA max. (24 VDC max.), Residual voltage: 1 V max.
Stability output: NPN open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max. *1
Protection circuit: Reversed polarity protection, over-current protection, surge absorber
Unit expansion: Up to 16 expansion units can be connected (a total of 17 units).*2
Mutual interference: suppression: 4
Rating:
1. Power voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
2. Current consumption: 35 mA or less
Environmental resistance:
1. Ambient light: Incandescent lamp: 10,000 lux max., Sunlight: 20,000 lux max.
2. Ambient temperature: -10 to +55 °C 14 to 131 °F (No freezing)*3
3. Relative humidity: 35 to 85 % RH (No condensation)
4. Vibration resistance: 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
5. Shock resistance: 500 m/s2, 3 times in each of the X, Y, and Z directions
Case material: Polycarbonate
Weight: Approx. 75 g