KEYENCE FS-N10 Fiber Optic Sensor New
Specifications:
Model: FS-N10
Type: 0-line
Main unit/expansion unit: Expansion unit (No output cable)
Control output: N/A*1
Light source LED: Red, 4-element LED
APC: ON/OFF switchable (Factory setting: OFF)
Response time: 50 μs (HIGH SPEED) /250 μs (FINE) /500 μs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)
Number of interference prevention units: 0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)
Unit expansion: Up to 16 units can be connected total (two output type is treated as two units)
Rating:
1. Power voltage: 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
2. Current Consumption: Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*2 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)*2 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)
Environmental resistance:
1. Ambient light: Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less
2. Ambient temperature: -20 to +55 °C -4 to +131 °F (No freezing)*3
3. Relative humidity: 35 to 85 % RH (No condensation)
4. Vibration resistance: 10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
5. Shock resistance: 500 m/s2, 3 times in each of the X, Y, and Z directions
Case material: Both main unit and expansion unit housing material: Polycarbonate
Weight: Approx. 20 g