Cart 2 india

Specification
AutoPartOrientation : front
AutoPartPosition : front_inside
Brand : EnruigeOK
BulletPoint1 : 【Low Voltage Protecting】OBD2 dash cam power cable which has a built-in intelligent program control chip. Accurately detect the car battery voltage, constant12V/24V voltage to 5v. When the battery voltage is lower than 11.6V, will stops working to prevent the battery from wasting power.
BulletPoint2 : 【2 Mode with Switch Button】Mode Surveillance, realize really 24-hour parking monitoring. Mode ACC, the obd hardwire kit will power off after 5 minutes when car turns off. The function of ACC is realized by detecting the voltage of the car. Within 5 min Since the electric quantity of the customer's car is still higher than 12.8V under flameout (our detection standard is 13V, the lowest is 12.8V), This 5 minutes is aimed at most cars in this range can be lower than 12.8V.
BulletPoint3 : 【 MODE1 】 PRESS THE RED BUTTON SWITCH TO" MODE -": at THIS MODE YOUR DASH CAM WILL KEEP RECORDING 24 HOURS NO MATTER YOUR CAR TURN ON OR OFF. SUITABLE for PARKING MONITOR.
BulletPoint4 : 【 MODE 2 】 PRESS THE RED BUTTON SWITCH TO" MODE O": THIS IS ACC MODE. at THIS MODE YOUR DASH CAMERA WILL TURN ON/ OFF WHEN YOUR CAR TURN ON/OFF.
BulletPoint5 : Special reminder: 【 MODE Switching 】 When switching between 【mode 1】 and 【mode 2】, the OBD adapter must be unplugged and reinserted once, otherwise the mode switching will not working. Specific steps: 1. Pull out the ODB adapter. 2. Switch to the mode that you want. 3. Reinsert the OBD adapter
BulletPoint6 : 【Plug and Play OBD Power Adapter】Dash cam power cable obd2 cable makes your 24-hour monitoring easier. No Wiring Fuse Operations, more convenient than all dash cam hardwire kit. Directly connect the OBD port with the dash car camera.
Color : Black
CompatibleDevices : Smartphone
CompatibleWithVehicleType1 : Car
CompatibleWithVehicleType2 : Truck
CompatibleWithVehicleType3 : RV
ConnectivityTechnology : Wi-Fi
ConnectorGender : Male-to-Male
ConnectorType1 : USB Type A
ConnectorType2 : OBD MALE
ControlMethod : application
CustomerPackageType : coiled in protective tubing
ExternallyAssignedProductIdentifier1 : 768587466649
ExternallyAssignedProductIdentifier2 : 0768587466649
IncludedComponents : 1 x Dash Cam, 1 x USB Power Cable, 1 x 32GB SD card ,1 x User Manual
IncludedMemoryCardSize : 32 GB
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : EnruigeOK OBD OBD2 to USB-A Port Power Cable for Dash Camera 24 Hours Surveillance Acc Mode with Switch Button 3Pin OBDII Adapter Hardwire Charger Cable 12-26V to 5V 2.5A
ItemPackageDimensions_Height : 16.1036 centimeters
ItemPackageDimensions_Length : 3.302 centimeters
ItemPackageDimensions_Width : 11.6078 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : vehicle-on-dash-video
Manufacturer : Enruige
MaxAperture : 1.8 f_stop
MaximumCurrent : 2.5 amps
MaximumVoltage : 35 volts
ModelName : AM750
ModelNumber : ERG-USB
MountingType : Dashboard Mount
NumberOfItems : 1
NumberOfPins : 7
PartNumber : ERG-USB
ProductDescription : Special reminder: 【 MODE Switching 】
When switching between 【mode 1】 and 【mode 2】, the OBD adapter must be unplugged and reinserted once, otherwise the mode switching will not working.
Specific steps: 1. Pull out the ODB adapter. 2. Switch to the mode that you want. 3. Reinsert the OBD adapter


Spec:
ACC mode Input: 13V-36V | Output: 5V/2.5A
Surveillance mode Input: 11.6V-36V | Output: 5V/2.5A
Extension cable: 3.5meter (11.5 ft) length
Interface: USB-C

Working Mode:
Mode “O”:
ACC mode, when your car ACC is off, the OBD power cable will also power off after 5 minutes.
Mode “— ”:
Surveillance mode, when you car ACC is off, the OBD power cable will keep working until detecting the car battery voltage is at 11.6V(low voltage),it will power off after 30 seconds.
The low voltage protection for mode “—” protect your car from running out the battery, enable you have enough voltage to start the car for next driving.

Attention:
1.If you leave your car for many days no driving without surveillance purpose, we suggest you to set the working mode in ACC mode “O”.Cars battery will run out day by day because your dashcamera are consuming power all the time in surveillance mode “-”.
2.From our clients feedback,the cable work well with most of the European cars, but DON NOT with most Chevy or GM vehicles,and some Japanese models,as these vehicles may use different OBD definitions,it may cause your dashboard warnings,please see our incompatible list in last photo.
3.Our OBD2 definition is " pin4 for ground, pin5 for signal,pin16 for power supply".

ProductSiteLaunchDate : 2023-02-10T04:27:55.163Z
RecommendedUsesForProduct : powering dash cameras in cars, providing a powering solution with smart switch for dash cameras in cars
SupplierDeclaredDgHzRegulation : not_applicable
SupportedStandards : 1080p
UnspscCode : 43202222
VideoCaptureResolution : 1080p
WarrantyDescription : 12 Monthly
Wattage : 87.5 watts