Cart 2 india

Specification
Brand : T-king
BulletPoint1 : Part number:ES2P-100, ES2P100, 05701858
BulletPoint2 : Application:05701858 EG Series ES2P-100 Pressure Sender 2 Wire 0-100 PSI Boat Marine
CareInstructions : Hand Wash
Color : Stainless Steel
ExternallyAssignedProductIdentifier : 7427052336520
IncludedComponents1 : Lid
IncludedComponents2 : Chopping Blade
IncludedComponents3 : Container
ItemName : T-king Oil Expeller Machine, DIY Stainless Steel Manual Oil Press Machine (Manual)
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-oil-pressure-tools
Manufacturer : unbrand
Material : Stainless Steel
ModelName : Oil Expeller Machine
ModelNumber : 05701858
NumberOfItems : 1
PartNumber : 05701858
ProductDescription : T-king Oil Expeller Machine, High Quality DIY Stainless Steel Manual Oil Press Machine

Assembly:

Before operation please fix the frame and make sure crank can be turned freely.

Lubricate washer with edible oil and insert on screw shaft from the small end.

Insert screw shaft in press cage.

Screw on press cage cap and screw on terminal adjustment bolt.

Attach crank arm to screw shaft and tighten the bolt.

Fill 80% fuel to the lamp bottle (kerosene or alcohol). Pass a 15cm wick through the washer.

Leave 0.5cm of wick outside and put the longer end in the fuel bottle. Place washer at the bottle mouth.

Place the lamp under press cage. Secure the lamp with rubber band.

Heating:

To guarantee the oil output, the press cage should be heated for about 10 minutes.

when the press cage temperature reaches 50-70°C, material can be put into inlet for pressing.

The lamp remains heating during pressing as well.

Operation:

Make sure no impurities in the material before pressing.

At the beginning of pressing, oil flowing from the terminal adjustment bolt is normal.

Loose the terminal adjustment bolt if the discharged cake is too dry and crank turning resistance is too big

Tighten the terminal adjustment bolt if the discharged cake contains too much oil residual.

Cleaning:

Clean the oil press immediately after operation. Otherwise residual in the machine will get hard and affect next operation.

Safety and warnings:

Material friction and lamp heating cause very hot press cage, press cage cap and terminal adjustment bolt.

Keep hands clear of the hot parts. And if you indeed need operate the hot parts please take reasonable protection steps.

Package including:

1 x Stainless Steel Manual Oil Press Machine
ProductSiteLaunchDate : 2020-03-10T10:27:38.784Z
Style : Manual
UnspscCode : 52141500
Wattage : 1500 watts