Cart 2 india

Specification
Brand : KiWAV
BulletPoint1 : Compatible for Honda motorcycles, Hawk, Goldwing and most motorcycles with OEM oil filters size: 65mm x 14 flutes. This wrench fits oil filters: 15410-MFJ-D01, 15400-PLM-A01, 15400-PLM-A02. Fitment is the same as OEM oil filter wrench 07AAA-PLCA100.
BulletPoint2 : A must have handtool for removal oil filter. Side to side 64.5mm, corner to corner 66mm, depth 22mm, please check your oil filter before ordering, or consute KiWAV for further assistance.
BulletPoint3 : UNIQUE FEATURE-- Remove the oil filter cap faster, safer, and easier. Even if the oil filter cap is extremely tight, KiWAV oil filter cup helps complete the job effortlessly. DURABLE-- 4.6mm thickness metal around the square hole. NOMORE CRACKED when you try to twist it hard.
BulletPoint4 : LONG LIFETIME-- made from high strength forged steel for firm and durable, without the problems of broken in half, stripped the filter housing etc. USAGE-- Easy of Use for removal of oil filter Allows the spin-on filter to be turned with a 3/8" drive socket wrench. (Hint: put a rag or sandpaper inside the wrench will help to grab filer tightly)
BulletPoint5 : This tool is intended for removing the filter; it is not for installation. Always install the oil filter by hand.
Color : Black
ExternallyAssignedProductIdentifier1 : 799418223322
ExternallyAssignedProductIdentifier2 : 0799418223322
FinishType : Powder Coated
GpsrSafetyAttestation : 1
IncludedComponents : 86mm oil filter wrench
ItemLength : 66 millimeters
ItemName : KiWAV Oil Filter Wrench 65 mm x 14 flutes Removal tool compatible for Honda Hawk PC800 CB400 Nighthawk & Toyota 1800cc car
ItemPackageDimensions_Height : 14.732 centimeters
ItemPackageDimensions_Length : 1.524 centimeters
ItemPackageDimensions_Width : 12.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-oil-filter-wrenches
Manufacturer : KiWAV
Material : Alloy Steel
Material1 : Metal
Material2 : Alloy Steel
Material3 : Alloy Steel
ModelName : oil filter wrench
ModelNumber : 20230502-1
NumberOfItems : 1
OperationMode : Mechanical
PartNumber : KR-K437-oilfiltertool-Honda
ProductDescription : Features:
1. A must have handtool for removal oil filter. Side to side 64.5mm, corner to corner 66mm, depth 22mm, please check your oil filter before ordering, or consute KiWAV for further assistance.
2. UNIQUE FEATURE-- Remove the oil filter cap faster, safer, and easier. Even if the oil filter cap is extremely tight, KiWAV oil filter cup helps complete the job effortlessly.
3. DURABLE-- 4.6mm thickness metal around the square hole. NO MORE CRACKED when you try to twist it hard.
4. LONG LIFETIME-- Made from high strength forged steel for firm and durable, without the problems of broken in half, stripped the filter housing etc.
5. USAGE-- Easy of use for removal of oil filter allows the spin-on filter to be turned with a 3/8" drive socket wrench. (Hint: put a rag or sandpaper inside the wrench will help to grab filer tightly)
  Material: Stamped steel
Color: Black Finish
Size: Fit oil filter size 65mm x 14 flutes
Net Weight:115 g
Quantity: 1 PC
Compatibility:
Compatibility:
Compatible for Honda motorcycles, Hawk, Goldwing and most motorcycles with OEM oil filters size: 65mm x 14 flutes.
This wrench fits oil filters: 15410-MFJ-D01, 15400-PLM-A01, 15400-PLM-A02.
Fitment is the same as OEM oil filter wrench 07AAA-PLCA100.
--
NOTE:
1. DO not work on any oil filter with a rubberized coating on the end (like Fram does), it would only work if the aftermarket filter top is of the same design as the original oil filter.
2. If the original oil filter has been replaced by another aftermarket oil filter, then there is a chance that it might not fit.
3. This tool is intended for removing the filter; it is not for installation. Always install the oil filter by hand.

ProductSiteLaunchDate : 2014-03-13T14:47:40.831Z
SpecificUsesForProduct : Professional
Style : Unique
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27111700