Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Thread Size: M3x0.5mm; Total Length: 7mm/0.28"; Outer Diameter（+0.5/-0mm）: 5mm/0.2"; Package Content: 30 x Knurl Thread Inserts Nuts
BulletPoint2 : Material - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance. The high thermal conductivity of brass thread inserts means faster heating and insertion into plastic parts.
BulletPoint3 : Feature - The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm, and uniform, easy to install.
BulletPoint4 : Advantage - Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it will not fall off easily. Has a certain torsion and tension.
BulletPoint5 : Application - Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection, widely used in 3D printing injection molding, computer products, electronic products, circuit board fixing, etc., to achieve tight fixing.
BulletPoint6 : Simple hole preparation
Color : Gold Tone
DriveSystem : Spline
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 0839137000627
ExternallyAssignedProductIdentifier2 : 839137000627
FinishType : Silver
ItemDisplayWeight : 0.01 pounds
ItemName : uxcell Knurled Insert Nuts, 30Pcs M3 x 7mm(L) x 5mm(OD) Thread Printing Brass Nuts Female Threaded Inserts Brass Heat Set Insert Embedment Nuts
ItemPackageDimensions_Height : 0.24 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 30
ItemShape : Round
ItemTypeKeyword : hardware-nut-inserts
Manufacturer : uxcell
Material : Brass
MeasurementSystem : Inch
MetalType : Brass
MetalType1 : Aluminum
MetalType2 : Carbon Steel
MetalType3 : Copper
MetalType4 : Iron
ModelNumber : TIKATARER9tpyiahgu7
NumberOfItems : 30
NumberOfPieces : 30
PartNumber : a24021700ux0043
ProductDescription : Descriptions:

1. Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance
2. The knurled insert nut has a guide, so no countersink is required. The surface is smooth, firm, and even, and easy to install.
3. It can be installed into a plastic matrix by ultrasound or heat during the injection molding process.
4. Can be widely used in 3D printing injection molding to achieve tight fixation.
5. Because the outer diameter of the insert is embossed, it forms certain friction and bites force with the brass insert after molding, which can be fixed on the inside and will not fall off. Has a certain torsion and tension.

Specification:
Material: Brass
Thread Size: M3x0.5mm
Total Length: 7mm/0.28"
Outer Diameter（+0.5/-0mm）: 5mm/0.2"

Package Content:
30 x Knurl Thread Inserts Nuts
ProductSiteLaunchDate : 2024-03-20T02:41:11.129Z
Size : M3 x 7mm x 5mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31161700