Specification Brand : uxcell BulletPoint1 : [SIZE] - Thread Dia: M4; Pitch: 0.7mm; Overall Size: 6mm x 8mm / 0.24" x 0.31"(OD*L) BulletPoint2 : [MATERIAL] - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance BulletPoint3 : [FEATURE] - The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install. BulletPoint4 : [ADVANTAGE] - Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it will not fall off easily. Has a certain torsion and tension. BulletPoint5 : [APPLICATION] - Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection, widely used in 3D printing injection molding to achieve tight fixation. DriveSystem : Spline ExteriorFinish : Brass FinishType : Brass ItemName : uxcell Knurled Insert Nuts, 120Pcs M4 x 8mm L x 6mm OD 3D Printing Brass Nuts Female Threaded Inserts Brass Heat Set Insert Embedment Nut ItemPackageDimensions_Height : 14.1 centimeters ItemPackageDimensions_Length : 1.8 centimeters ItemPackageDimensions_Width : 10 centimeters ItemPackageQuantity : 120 ItemTypeKeyword : hardware-nut-inserts Manufacturer : uxcell Material : Brass MaximumShearStrength : 200 MPa MeasurementSystem1 : Metric MeasurementSystem2 : Inch MetalType : Brass MetalType1 : Zinc MetalType2 : Bronze ModelNumber : a18071100ux0203 NumberOfItems : 120 NumberOfPieces : 120 PartNumber : a23061100ux0248 ProductDescription : Description: Made of brass material, with high hardness, durability, good thermal conductivity and heat resistance. The embedding nut has a guide so there is no need for a counterbore or countersink. Smooth surface, firm and uniform, easy to install. These Knurled Insert Nut can be widely used on the injection for tightly fixing. Can be installed by ultrasonic or heat into the plastic matrix, or formed during the injection. Due to the embossing process on the outer diameter of the insert, it forms certain friction and bites force with the brass insert after forming, which can be fixed on the inside so that it cannot fall off. Has a certain torsion and tension.
Specification: Material: Brass Finish: Vibration Polishing Thread Size: M4 x 0.7mm(Dia*Pitch) Overall Size: 6mm x 8mm / 0.24" x 0.31"(OD*L)
Package Content: 120 x Knurled Insert Nuts ProductSiteLaunchDate : 2023-07-06T10:12:06.272Z Size : M4 x 8mm x 6mm SupplierDeclaredDgHzRegulation : not_applicable UnspscCode : 31161700