Cart 2 india

Specification
Brand : Hillman
BulletPoint1 : Features dual threading
BulletPoint2 : Coarse exterior thread
BulletPoint3 : Solid brass
BulletPoint4 : Country of Origin: United States
BulletPoint5 : Significantly improve thread strength and wear when applied to lowstrength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc.
Color : Gold
DriveSystem : Screw
ExteriorFinish : Plain
ExternallyAssignedProductIdentifier1 : 008236025248
ExternallyAssignedProductIdentifier2 : 0008236025248
ExternallyAssignedProductIdentifier3 : 00008236025248
FinishType : Brass
GpsrSafetyAttestation : 1
GradeRating : Industrial
ItemName : The Hillman Group 3019 1/4-20-Inch Brass Wood Insert, 20-Pack
ItemPackageDimensions_Height : 3.81 centimeters
ItemPackageDimensions_Length : 8.128 centimeters
ItemPackageDimensions_Width : 6.604 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardware-nut-inserts
Manufacturer : The Hillman Group
Material : Brass
MeasurementSystem : Inch
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
MetalType : Brass
ModelNumber : 3019
NumberOfItems : 20
NumberOfPieces : 20
PartNumber : 3019
ProductDescription : Specification:




Item Type: Thread Inserts
Material: SUS304
Model: M10x1.25
Thread Specification: M10x1.25 (mm)
Outside Diameter Before Installation: Approx. 12 ~ 15.5mm / 0.5 ~ 0.6in
Diameter of Drilling Drill Bit for Installation: Approx. 10.3mm / 0.4in
1D/1.5D/2D/2.5D/3D:
Length After Installation: Approx. 10mm / 0.4in
15mm / 0.6in
20mm / 0.8in
25mm / 1in
30mm / 1.2in


Thread Protective Sleeve Model Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation. How to Use:
1. Drilling
Use the drill bit of the size listed in the parameter table of the wire thread insert to drill the hole. Be careful not to drill the hole into a cone shape. The chips generated by the drill hole must be blown out with compressed air. After drilling, the counterbore should not exceed the depth of 0.4 pitch. Too large counterbore is not conducive to the screwing of the wire thread insert.
2. Tapping
3. Installation
4. Remove the handle (break off the mounting handle)
5. Unscrew








ProductSiteLaunchDate : 2014-01-20T00:00:01-08:00
Size : 1/4"
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 50
UnspscCode : 31161700