Cart 2 india

Specification
Brand : PGMJ
BulletPoint1 : 80 pieces 1/4"-20 Flush furniture screws threaded inserts for wood furniture. Comes with 9.0 mm white steel twist drill and matching drive tool
BulletPoint2 : Internal thread insert type: 1/4"-20, it is not a metric nut, the thread inside the nut is different, match this type when selecting accessories
BulletPoint3 : Flush Design permits insert to be installed below surface level. They can keep the two connected surfaces from meeting absolutely flush
BulletPoint4 : Usage: Use the matching bit pre-drill /drill a well-sized hole (depth is 1-2mm longer than furniture screw), then use a matching drive tool to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the screw hole.
BulletPoint5 : Applications:These furniture screws are wear-resistant . Suitable for furniture hardwood/ solid wood and furniture combinations.
Color : 1/4"-20 x 15mm-H
CompatibleGrooveDiameter : 0.25 inches
DriveSystem : External Hex
ExteriorFinish : Steel
ExternallyAssignedProductIdentifier1 : 749355451128
ExternallyAssignedProductIdentifier2 : 0749355451128
FinishType : Brass
GradeRating : Class 4.8
ItemName : PGMJ 80 Pcs 1/4 "- 20 Bolt Anchors for Wood - Headless Hex Socket Drive Nut Inserts Metal Threaded Insert Assortment, Bolt Fastener Connector for Woodworking Hardwares (1/4"-20x15mm-H)
ItemPackageDimensions_Height : 12.9032 centimeters
ItemPackageDimensions_Length : 3.9116 centimeters
ItemPackageDimensions_Width : 8.001 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : hardware-nut-inserts
Manufacturer : PGMJ
Material : Alloy Steel
MeasurementSystem : Inch
MetalType : Brass
MetalType1 : Carbon Steel
MetalType2 : Alloy Steel
ModelNumber : 1/4"-20
NumberOfItems : 80
NumberOfPieces : 80
PartNumber : 1/4"-20
ProductDescription : Metric Furniture Screws Flush Threaded Inserts set:
80 pieces 1/4"-20 Flush Furniture Screws Comes with 9.0mm White steel twist drill and 6mm drive tool.

Features of insert nut:
These threaded inserts are inserted into a pre-drilled hole by screwing in, in that case the external protrusions bite into the wood, preventing the nut from either turning or pulling out.
Flush design permits insert to be installed below surface level. They can keep the two connected surfaces from meeting absolutely flush

Suitable application:
Easy to install and with good stability, have a good effect in the furniture combination, suit for all Furniture woods of pine, plywood, fiberboard, etc..
How to use: pre-drill/ drill a suitably sized hole and enter with the drive tool.
PS：1. The hole depth is 1-2mm longer than furniture screw;
2.If that hardness of the wood material is high, enlarged a little bit the screw hole to fit the screw.

Specification:
Material: high hardness and high quality carbon steel
Size:
Furniture Screws: 1/4"-20
External Diameter:0.410”(10.5mm)
Inside Diameter: 0.315”(8mm)
Total Length: 15mm.
Drill: 9.0mm
Drive tool: 6mm

Quantity:
80 x Furniture Screws
1 x Drill
1 x Drive tool

Note: Small objects and sharp drill bits, please keep away from children
ProductSiteLaunchDate : 2021-04-28T02:24:37.285Z
Size : 1/4"-20 x 15mm-H
Style : HELIFOUNER Brass Nut Inserts
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 31161500